Search results

  1. CheemsK1500

    Putting a gas 350 in a 6.2 diesel frame, quick input please.

    With squares and even GMT400s to an extent, most of the drive-train stuff more or less “drops in” with only minor modifications sometimes being needed. Where things get messy, is when you start mixing and matching body panels and interior bits, especially when trying to make 73-76 stuff work...
  2. CheemsK1500

    Putting a gas 350 in a 6.2 diesel frame, quick input please.

    I don’t know if the engine mounts themselves are the same, but I know transmission bell housing bolt pattern will be same between a Detroit and a SBC. The biggest thing that needs to be addressed is that you’ll either need to convert the SBC power steering pump to work with Hydroboost brakes or...
  3. CheemsK1500

    A/C options - 81 C10 Non A/C cab (LS Swap in progress)

    If you commit to an OE style setup, I recommend looking at some schematics and diagrams before you start making purchases to make sure you don't miss anything. The parts list in my earlier post covers the majority of it, but be sure to look at the various diagrams to make sure you do not miss...
  4. CheemsK1500

    A/C options - 81 C10 Non A/C cab (LS Swap in progress)

    There’s really no easier way to get the OE style AC parts, than to find or buy a truck a that already has them and take what you need. However, there’s not too much AC specific parts you need to acquire, and a lot of them can be purchased new. Off the top of my head, the 81-91 square body...
  5. CheemsK1500

    1975 K20 Brake Backing Plates(dust shields) needed

    Deleted
  6. CheemsK1500

    Fuk u

    I don’t know what OP is even mad about.
  7. CheemsK1500

    What have you done to your square lately??

    I finally converted my 6 lug front to an 8 lug (Previous owner installed a 14 bolt rear). It is nice being able to carry only one spare tire and have the same size lug nuts on all four wheels.
  8. CheemsK1500

    Well that sucks

    Did you lose air co Did you lose air conditioning function though? If you did not, then it is the heater core. If you did lose AC and find large amounts of engine coolant/antifreeze in the box, then that means you have possibly blown both a heater core and an evaporator core. The heater core...
  9. CheemsK1500

    Well that sucks

    The compressor is only capable of generating so much. Your RPMs will not really play a part unless someone put way too much refrigerant in the system at one point. It is an easy mistake to make when switching from r12 to r134a. r134a requires less refrigerant since it operates at higher...
  10. CheemsK1500

    A/C options - 81 C10 Non A/C cab (LS Swap in progress)

    Does the truck in question have factory AC? If it does, you might be better off just making the ac refrigerant lines to work with whatever compressor is on the LS engine, and using vacuum ports on the engine or external vacuum pump to operate the controls. Doing it like this guarantees the best...
  11. CheemsK1500

    Well that sucks

    It would originally use R12. If it was properly retrofitted for 134a, it should have R134a sized ports on it or adapters on top of the R12 ports. Outside of that, there’s no way to tell unless one of the components has been explicitly marked as 134a (some replacement compressors will come like...
  12. CheemsK1500

    Door panel rehab

    On my ‘85 C10 with the original door panels, I used SEM color coat. I think spraying a base coat of plastic adhesion promoter helped a lot. I didn’t sand, because I wanted to preserve the original texture. SEM does make a texture replacement product in an aerosol can, but I’ve never tried it...
  13. CheemsK1500

    Another Gauge Needles thread

    Maybe you can commission a CAD modeler or drafter to make you a model to 3D print. With measurements of the aftermarket needle and measurements of an original (even if you break one, you can still glue it back together to get the measurements.), it should be pretty straight forward. I don’t know...
  14. CheemsK1500

    1of 150 vehicles offered with no reserve

    Considering the overall condition, 17k isn’t a bad price.
  15. CheemsK1500

    1of 150 vehicles offered with no reserve

    Aside from the cheesy JC Whitney grille, that’s a pretty nice looking truck.
  16. CheemsK1500

    1st post. Round eye square guy in NE Texas.

    Welcome. That’s a beautiful truck. Shamrock green is best green.
  17. CheemsK1500

    What Trans for a cummins swap c10?

    At that point he might as well just sell the C10 and buy the Dodge, unless the Dodge in question is in exceptionally awful condition but still has a good frame.
  18. CheemsK1500

    What Trans for a cummins swap c10?

    For a 12 valve out of Dodge, this is applicable, but for one out of a medium duty Ford, the power steering pump is is gear driven behind the crank case and the vacuum pump is 12 volt firewall mounted unit. It’s a pretty safe bet OP is getting his engine out of Dodge, but there are quite a few...
  19. CheemsK1500

    What Trans for a cummins swap c10?

    A 12 valve isn’t the hardest swap you can do, though since you’re starting with a 1/2 ton, you will definitely want to beef up your frame and suspension. Granted, many 1/2 tons came from the factory with the 6.2 Detroit diesel, which isn’t exactly a lightweight engine, so the marginally heavier...
  20. CheemsK1500

    Windshield squirter does not work when intermittent module is connected.

    On my way ‘85 C10, I’ve been going through the windshield wiper system. For years, I assumed the squirter was broken, but when I hooked up the wiper switch straight to the harness without the intermittent module, it works. I feel inclined to blame the module, but the delay function still works...
  21. CheemsK1500

    BAT - 85 swb C10

    The flames on the headlight bezel really tie it together lol. This truck honestly looks like what happens when a high school kid in the late ‘90s/early 2000s inherits dad’s/grandpa’s truck, wants to “customize” it, but can’t afford to do anything drastic, so he settles for the flame stickers and...
  22. CheemsK1500

    BAT - 85 swb C10

    It looks pretty solid, but it’s about $5k overpriced in my opinion. I’ve seen similar condition 4x4s and equal to slightly better trucks like this one sell for 15 to 18k recently.
  23. CheemsK1500

    Question about center grilles - 81-87

    When I got my ‘85 it had one of those awful JC Whitney grilles on it. I was happy to ditch it. I don’t know why those were even ever remotely popular to begin with. They make the truck look like an air conditioning unit. As for fitment, you can put an 83-84 or 85-87 grille on an 81-82 truck...
  24. CheemsK1500

    Passenger door won’t lock from inside without key in door or lock from outside with key in door

    Update: I recieved my new set of lock pawls from Classic Industries. What’s odd is that the pawl that fit my passenger door had “LH” on the bag. I am going to assume it was just put in the wrong bag. I have functional locks on my both my doors again, so I am more than happy.
  25. CheemsK1500

    SBC 350 Possible issues with Carb?

    Does your 1406 still have an electric choke? On one 305 I have a 1406 on, the choke coil needs to be moved from time to time, or the truck will run like crap. Also check your vacuum advance line for any damage and look for vacuum leaks in general. I’m currently running an OE style fuel pump on...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,338
Latest member
jw23655
Top