Search results

  1. texasmike

    OEM Cruise Control

    Shoot Snoots, not a good answer. I’m not about to disconnect, pull out, try to thread and reconnect all of those wires and expect everything to work again. That will have to be a project for the next loaner. Thanks.
  2. texasmike

    OEM Cruise Control

    After waiting a long time for a re-manufactured servo (plastic vacuum port broken off), i finally got it installed and took it out for a test drive. I turned the multi-function switch to the on position and when I attempted to push the button in, it was already pushed in and would not come back...
  3. texasmike

    Idle Speed

    Thanks everyone, I really appreciate all of your comments, thought and help.
  4. texasmike

    Idle Speed

    Here's my dilemma on my stock engine/carburetor setup. I have the timing set at 11 degrees btdc @ 600 rpm (no dist. advance) and when i connect the distributor to manifold vacuum, the rpm jumps way up. I have backed the idle screw off to the point that it is no longer touching the throttle arm...
  5. texasmike

    Replacement Door Panels

    I ordered the interior kit in saddle tan from them about three years ago and they still look GREAT! Back then, it took about three weeks for shipping. Be sure to get a couple of cans of their paint to refresh your trim. I don’t remember but the kit may come with it. Perfect match!
  6. texasmike

    In need of a good paint and body shop in Houston area

    I haven't been by their shop in about a year and a half so I don't know what their work load is like. All I can vouch for is the quality of the work and their honesty. I must have 500 pictures of my truck while the work was being completed. Good luck with your project.
  7. texasmike

    In need of a good paint and body shop in Houston area

    Brandon, Did you see my reply/post in this thread about Kings Paint & Body in Conroe? He has been around a long time and offers a lifetime warranty. Real small shop with only three employees.
  8. texasmike

    In need of a good paint and body shop in Houston area

    I had to wait three months and it took another four months and a lot of $ to complete the project but the work was impeccable, (can you say "perfect"). Absolutely beautiful!! Kings Paint & Body, 15560 E. Williams Rd., Conroe, TX, 936-760-2989. He is VERY familiar with SB's and sends pictures...
  9. texasmike

    Posi Traction

    More pep was never the main reason to mess with it. It does pretty well, even with the 2.73 axle. My main concern was spinning the drive tire, even on dry pavement. I have almost new, Good Year Wranglers on it so I guess it's just not enough weight on the long bed axle that's the main problem. I...
  10. texasmike

    Anyone know where I can find this fabric?

    I believe what you're looking for is called Saddle Tan, for 81-87. I bought the covers from USA1 Industries and they are beautiful and a perfect original match. My problem developed when they did not fit because I had swapped the original fixed seat for one with a tilting back and didn't realize...
  11. texasmike

    Charcoal / vapor / evap canister, how it should be set up and other information

    I just saw your post and also want to thank you for taking the time to put together an excellent article.
  12. texasmike

    Carburetor

    Thanks for the information, I’ll give them a call.
  13. texasmike

    Carburetor

  14. texasmike

    Carburetor

    I'm looking for a good, rebuild-able 1984 Rochester Q-jet carburetor. Serial number must read 17084??? and have the electric choke option. If you have one that you would be willing to part with, send a couple of pictures, price with shipping and payment method. Thanks.
  15. texasmike

    Posi Traction

    Money or mpg really isn’t an issue and I have this ‘thing’ about trying to keep everything as close to ‘original’ as possible. I did remove all of the emissions stuff since it’s no longer required in my state, but everything else is pretty much stock. The photo in my membership description was...
  16. texasmike

    Posi Traction

    All good thoughts my friend’s, thanks.
  17. texasmike

    Posi Traction

    You know, I thought I had made up my mind to make the switch but after driving the truck the other day, I’m still on the fence. It’s running so damn good, acceleration is a little bit better than what one would expect with an SB, high gears and smog emissions equipment removed. Passing gear...
  18. texasmike

    Speedometer Gears

    Wow, that's a lot of good information and just what I needed. Anyone with a SB is really missing out if they don't visit this website. You guys also exhibit a lot of patience with us shade tree old man mechanics. thanks!!
  19. texasmike

    Speedometer Gears

    I have just about decided to change from a 2.73 to a 3.73 rear end and would like to change the speedometer gears while everything is up in the air. Does anyone know how to figure out what gears I would need to buy and where I can find them? I have a 700r4 with 225/75 R15 tires (28.3" ht.).
  20. texasmike

    Survey - Best posi trac/limited slip unit

    Thanks, that's the way I'm leaning after I saw the TPISly Sep.30,2019 thread.
  21. texasmike

    Survey - Best posi trac/limited slip unit

    Okay guys. which do you think is the best unit, a: Eaton Tru Trac or b: Yukon Dura-Grip, or are they about equal? I've decided to change my original 2.73 to a 3.73 behind my 700r4 tranny and stock 305.
  22. texasmike

    Posi Traction

    Thanks Doug, I'm considering the same setup as you. If you don't mind, I'd like to get back with you early next year to see how everything is working for you with the 700r4. I did the tire turn and driveshaft test and found out I have 2.73 gears so I would really see some difference. I'm getting...
  23. texasmike

    Posi Traction

    Probably a dumb question but will changing the rear end gears affect the speedometer reading?
  24. texasmike

    Differential Gear Ratio

    Do you know if the factory units are still available (part number) and how many splines (28 or 30) my axle shaft might have? I have a suspicion the 8 numbers have to do with the ring gear. Thanks for your reply.
  25. texasmike

    Differential Gear Ratio

    I jacked up the drive wheel and turned the tire twice and got 2-3/4 turns on the drive shaft so it looks like I have 2.73 gears. I'm going to switch to 3.42 gears so can someone tell me what the 8.5 and 8.6 designation means and how I can determine which I have. I frequently break loose the...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,339
Latest member
wonone
Top