Search results

  1. texasmike

    Used Dash Pads- Any value?

    Does anyone know what kind of padding, type of material and thickness, was under the original vinyl cover. If it's too thick, wouldn't it be hard to get it to fit in place? And can it be perforated on each end for the radio speakers?
  2. texasmike

    Wood bead seat cover

    I finally got it installed and it works and functions as expected, the same as back in the day. It is comfortable and presents a nostalgic look. I have been using the cover for about two weeks and it has stayed in place and does not move at all when I enter and exit the bench seat. It's a good...
  3. texasmike

    Possible new site for parts

    That's exactly what I found and ordered but from a different site. The very same picture showing six clips but advertising eight. $4.95 for the pack + $9.98 shipping. It didn't say from where at the time. I checked the O'Reilly's and Auto Zones in my area and they didn't have them.
  4. texasmike

    Possible new site for parts

    I have spent hours trying to find one locally and ran into a brick wall. I have even been to some shops to see if they have been one of those people who purchased a box of 50. I am in the greater Houston area and the big distributors will not sell to the public if the order is less than $50. I...
  5. texasmike

    Possible new site for parts

    Well, the jury is still out on this one. I received a message today that my order had shipped with the tracking number. The message also indicated to allow 20-30 days for an international shipment. Since most everything comes from China, maybe this is somehow coming from the factory and...
  6. texasmike

    Rochester Q-Jet running rich

    It's great that this thread is still going. Your suggestion is exactly what I decided to do. I did check the return line and all seems to be OK. The choke is set and operating as it should. The engine starts immediately on hot starts. Next day starts take two pumps of the pedal and starts...
  7. texasmike

    Possible new site for parts

    Well fellas, you aren't going to believe this! Today at 2:50 am, I received an email from [email protected] with a very long (18 numbers) order number from a place called Order Center. It confirmed receipt and payment for eight clips and said that a tracking number would be sent in a few days...
  8. texasmike

    Possible new site for parts

    This is a fraudulent site even though it has an https:// in its address. It cost me $15 to find out and had to cancel my VISA card today when I was notified that Chase had denied a $2,100 charge at Lowe's pending my authorization. Maybe there is a special place in hell for these types.:mad:
  9. texasmike

    Possible new site for parts

    Two hours later, I still have not received conformation of my order or an order number. Maybe I just blew $15 but I will let you know. Maybe this was AI generated but the https:// is what made me think it was legitimate.
  10. texasmike

    Possible new site for parts

    Yeah, you should take a look at "gm starter motors". I'll let y'all know if I get the clips.
  11. texasmike

    Possible new site for parts

    By chance I discovered this site (scam site) while looking for a throttle rod retaining clip. I found my item and then began searching "door lock solenoid", "alternator", "brake master cylinder", etc. They had the items which I believed were fairly priced and free shipping. I don't know about...
  12. texasmike

    Carburetor TV cable retainer clip

    After spending about 3 hours on the PC and phone, I ran across an interesting site (https://mall.hollowshire.com) which is worth checking out and playing with. My search was "throttle rod retaining clip" and then I tried "alternator" "brake master cylinder", etc. Evidently they sell many...
  13. texasmike

    Carburetor TV cable retainer clip

    Rick, that Dorman clip is exactly what I need. My accelerator cable is retained on the carb shaft with that clip the same way as the TV cable. I'll order a few from Summit. Thanks
  14. texasmike

    Carburetor TV cable retainer clip

    Does anyone know if the TV cable retainer clip is still available? O'Reilly and Auto Zone did not have anything close. I believe the same clip is used to attach the accelerator cable to the carb. I may have blown the thing off with a blast of compressed air while blowing out the engine bay since...
  15. texasmike

    Wood bead seat cover

    Everything I looked at, and it was a lot, is designed for bucket seats. The one pictured in my first post was the only one I found that would fit properly I contacted the seller and he said for bucket seats only. I ordered it anyway and cut the elastic band off and plan to have some bands sewn...
  16. texasmike

    Wood bead seat cover

    I read an article in the Hagerty Drivers Club magazine which made me start thinking about them. The author had an early model Ranger pickup that he was in love with. His only compliant was how uncomfortable the seat was and after about an hour, his leg and back began to hurt. He wanted to take...
  17. texasmike

    Wood bead seat cover

    I'll keep you posted on how I like mine when I get it installed and secured.
  18. texasmike

    Wood bead seat cover

    Remember when round wood bead seat covers were the craze back in the 70's? I started thinking about them and wondered if they could work on a bench seat. A quick search revealed that there are a lot of them still being offered. The issue is that they are designed for bucket seats. I did find one...
  19. texasmike

    Bus Bar Ground

    I don't know if anyone is following this thread but here is my latest report. I was getting 12v at the power lock switch plug but when I jumped across the plug pins, the locks would not work. I figured a bad ground or relay so I started searching for the ground bus bar but never put my eyes on...
  20. texasmike

    Bus Bar Ground

    That's a really neat device.
  21. texasmike

    Bus Bar Ground

    Thanks again Glen, I will take another look. I will also try to examine the wires where they pass from the door to the cab. I don't hear the relay click when I work either door lock switch. Those switches were installed in 2020 and it's hard to believe that both would go out at the same time. My...
  22. texasmike

    Bus Bar Ground

    Does anyone know where the bus bar ground for the door panel switches is located? I was hoping that it was behind the drivers side kick panel but it wasn't. While looking, I ran across a device attached to the bottom of the steering column. What is it?
  23. texasmike

    Power door locks

    Thanks Glen, I was wondering where the door lock switch was grounded. I guess that bus bar is behind the kick Panel?
  24. texasmike

    Power door locks

    This will be a dumb question for most of you; If I am getting 12v to my switches and either lock does not operate, if I use my meter leads and touch the red one to the center pen on the switch plug and the black one to touch one of the other two pins, shouldn't the solenoid go either up or down...
  25. texasmike

    Looks like bad news for me

    OK, here is the latest. With my digital VM, when I touch the red lead to the org/blk center pin wire on the switch and the blk lead to a door bolt, I have 12.45v but the locks still do not work. I tried my original switches and nothing happens. I also tried all of this with the metal and plastic...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,186
Members
43,338
Latest member
jw23655
Top