Search results

  1. Keith Seymore

    Rear Window size question

    Agree. K
  2. Keith Seymore

    Body swap on a c10 1981 to a 1985 k1500

    This. Column shifted 2wd (ie, auto trans, or three on the tree) = low hump Manual shifted 2wd (ie, M20 with creeper, or MY6 overdrive) and 4wd are all high hump. There might still be enough clearance to go from high hump to low hump because the factory put enough margin in there to account...
  3. Keith Seymore

    67 Mile V10

    I didn't. I followed my truck down the line as it was built and drove it to the shipping building myself. It never occurred to me until modern days that I should have kept any paperwork (build sheets, inspection tickets, window sticker). K
  4. Keith Seymore

    67 Mile V10

    I'm not obsessing over this (!) - but here is the resolution on the window sticker discrepancies: It's a repop. I contacted my favorite window sticker guy to ask his opinion and he admitted it was his work and that it was a mistake. He was in a hurry, etc. and said there were a few...
  5. Keith Seymore

    67 Mile V10

    Tire RPOs are messed up, too. Should be XUZ (front), YUZ (rear - which is shown correctly) and ZUZ (spare). K
  6. Keith Seymore

    67 Mile V10

    That's my conclusion as well. K
  7. Keith Seymore

    67 Mile V10

    Thank you. I don't want to be "that guy" but am genuinely curious. K
  8. Keith Seymore

    67 Mile V10

    Here's mine for comparison:
  9. Keith Seymore

    67 Mile V10

    I like how you can still see the build sequence number written on it:
  10. Keith Seymore

    67 Mile V10

    Yep - it's nice. Not casting aspersions - but I sincerely wonder why the window sticker says St Louis for a final assembly location when it clearly has a Flint VIN: H = 1987 model year F = Flint Assembly 387275 = serial portion of VIN K
  11. Keith Seymore

    FB Marketplace find near Austin, Texas: 5 aluminum K10 wheels $50

    My recollection is that the pace trucks were 1/2 ton. I do not recall those Sarge wheels. Are you sure they made it into production? They don't even have center caps in the photos. I would be inclined to believe it's something that got created for the photo and then went no further. K
  12. Keith Seymore

    New Process A833 4speed w/ OD MY6 MM7

    Yes. Insert shim stock on both sides of the shifter and it should pull right out. https://67-72chevytrucks.com/vboard/showthread.php?t=342926&page=11 K
  13. Keith Seymore

    My-6 new process 3-speed overdrive

    That sounds a bit heavy. I was able to lift it out and back in without assistance (not like a TH400, for example, where I use the floor jack). K
  14. Keith Seymore

    FB Marketplace find near Austin, Texas: 5 aluminum K10 wheels $50

    I see my work here is done. It was changed as a cost savings. Forged = RPO PH7 Cast = RPO N90 I think the forged wheel will be smoother on the backside, whereas the cast wheel will have more of an "as cast" texture. Any visible parting lines are wider on a forged part than on a cast part...
  15. Keith Seymore

    FB Marketplace find near Austin, Texas: 5 aluminum K10 wheels $50

    Not 8 lug (may have been a typo). 5 Lug and 6 lug only. We never did have a nice factory aluminum wheel for 8 lug, particularly dually. I always had to run a set of aftermarket Alcoa wheels on those. K
  16. Keith Seymore

    My-6 new process 3-speed overdrive

    Correct - MY6 uses ATF. https://67-72chevytrucks.com/vboard/showthread.php?p=3662550&highlight=Pig#post3662550 ;) K
  17. Keith Seymore

    How many bolts hold the transmission on and where?

    I wonder if there is enough room to drop the flywheel without undoing the trans, after the torque converter is pushed back? K
  18. Keith Seymore

    Confusing VIN number for 80 pickup

    I'm sorry - one more thought: Since Flint Assembly had two separate assembly lines under the same roof the separate serial number starting points may have been an attempt to provide some additional differentiation for those VINs. K
  19. Keith Seymore

    Confusing VIN number for 80 pickup

    They used to pass these VIN cards out at the beginning of the year and we would carry them around in our shirt pocket, along with our pocket protector and note cards for the day. I don't know why. It's not like we were going to de-code a particularly sticky VIN while we were using the bathroom...
  20. Keith Seymore

    Confusing VIN number for 80 pickup

    Agree; I remember. I should have been more clear I was stating an example. Cadillac Escalade VINs also started with 600001 for some years. We in engineering and product planning got to pick that. Back to my stream of thought: most plants* have a body bank between the cab shop and paint...
  21. Keith Seymore

    My-6 new process 3-speed overdrive

    This could be the clutch throwout bearing - which would be bad regardless of the trans used. K
  22. Keith Seymore

    My-6 new process 3-speed overdrive

    Yes - I would keep the MY6. It's a cool little trans, plus you get the bragging rights of having a MOPAR trans (and the cool Hurst shifter) in your truck from the factory. And - it is admittedly rare-ish across all the model years, regardless of if the number is 100 or 300 or 10,000. Did I...
  23. Keith Seymore

    My-6 new process 3-speed overdrive

    Not sure about this, either. Since the MY6 trans was also available in the full size Blazer it conceivably could have been had in the '88 and '89 V Blazer models. Unfortunately those generic info packets are not in the GM Heritage Center archive so I can't verify. I can say the '90 and '91 V...
  24. Keith Seymore

    My-6 new process 3-speed overdrive

    Not quite what I said; I said that 100 were built under the Temporary Deviation (one of which happened to be mine). I don't know if they went back and opened up the production volume if/when the supplier issue was resolved. K
  25. Keith Seymore

    Please Help I'm Stuck!

    That's my SPID, as a reference, per OP's request; not the OP's. I added cruise to my truck via the over the counter GM service parts kit. K

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,340
Latest member
hauto85
Top