Search results

  1. 1low4x4

    Always wanted to ProCharge a daily driver

    Well I've been away far too long. I sold my square to help fund my company, and now that its taken off I've bought another truck. 2014 Silverado 5.3 LTZ. Love this thing. Put some heavy ass wheels and tires on it and some tint, other than that its stock. For now. I got a smoking deal on a used...
  2. 1low4x4

    AC compressor oil capacity?

    Thanks chengny
  3. 1low4x4

    AC compressor oil capacity?

    Im afraid I should've poured the oil out and started over. I added 5oz to the 3 the compressor said it had, and it cools, but no bite to the air. The gauges read perfect, we put in the 3 cans of refrigerant like we always do. Im afraid I may have too much oil
  4. 1low4x4

    AC compressor oil capacity?

    Free website I found also, but 10 ounces sounds like too much
  5. 1low4x4

    AC compressor oil capacity?

    Hey guys Im getting ready to install this ac compressor. I cant ever remember how much oil to put in. It came charged with 3oz. of oil. Its the pancake style. Truck in my sig. Also, what hole do I pour it in again?
  6. 1low4x4

    RETRO-Mod: Jeep intermediate steering shaft

    I think Im going to try this. With a 4" lift and 35's, brand new draglinks, brand new connecting rod ends, balljoints, sway bar extensions, greasable leaf spring poly bushings, a new rag joint, and a new steering box, It STILL has play in the wheel like a worn out Mexican dump truck. Its...
  7. 1low4x4

    700r4 cross member spacers

    The spacers are to drop the case when you add a lift. It wont hurt to have them where they are. Although, those factory spacers are cheesy. Best to get some thicker ones
  8. 1low4x4

    4 prong plug Question 700r4

    Here's mine
  9. 1low4x4

    4 prong plug Question 700r4

    Hey guys, I see the wiring diagram for the 4 prong plug on the 700r4, but its been 6 months since I had mine out and I only 1 of the 3 ways is soldered together, the other two look like they were broken before hand, when I was already driving it. So, I'm seeing that I am using terminals A, B...
  10. 1low4x4

    Needed: 10 bolt rear housing pinion Diameter

    Also, I counted the splines on my 10 bolt pinion and my 12 bolt yoke, and while both have 30 splines the yoke will NOT slide on the pinion shaft. So looks like I'm buying another yoke anyway
  11. 1low4x4

    Needed: 10 bolt rear housing pinion Diameter

    I know that, I mis worded. I need the diameter of the housing where the pinion goes
  12. 1low4x4

    Needed: 10 bolt rear housing pinion Diameter

    Or, will my 12 bolt yoke even fit the 10 bolt!!!! Im reading that the 12 bolt is 30 splines and the 10 was 28 spline up until 88!
  13. 1low4x4

    Needed: 10 bolt rear housing pinion Diameter

    Does anyone have a 10 bolt housing they could mic for me? I'm trying to figure out the Diameter of the pinion on the housing. I'm trying to source a pinion seal. I know for fact that the O.D. of the new yoke shaft I have is 1.74", so that would be the inner diameter of the seal. All I need is an...
  14. 1low4x4

    Calculating compression ratio

    Well it wouldn't be that hard. Besides, trans and transfer case are out now anyway, may as well pull the radiator and whatnot. All I got to do is get to the cam and valley. Ive been wanting to go bigger cam anyway
  15. 1low4x4

    Calculating compression ratio

    Gotcha. Thanks yall. I appreciate the quick answers. Now, while I have yall here, My engine is a roller cam capable block. One piece rear main seal.....should I convert it to roller cam? Is it worth the price?
  16. 1low4x4

    Calculating compression ratio

    Thanks for the responses. The engine has been together and running (hard) now for about 8 years lol. I just finally got curious as to the CR
  17. 1low4x4

    Calculating compression ratio

    Man, If Id have known buying 4 relief flat top pistons was basically dished pistons, I wouldn't have got them. lol
  18. 1low4x4

    Calculating compression ratio

    Yeah, it changed to 9.5:1
  19. 1low4x4

    Calculating compression ratio

    fucckkkkkk
  20. 1low4x4

    Calculating compression ratio

    ANd another calculator says 9.56:1.
  21. 1low4x4

    Calculating compression ratio

    So, Last time I called Comp cams, they wouldn't or couldn't recommend a cam to me, even with all my engine specs, without a compression ratio. My guess is they don't really know without the computer telling them, and the computer requires a compression ratio. So.. I looked up a compression...
  22. 1low4x4

    86 K10 5.3 swap

    I admire the work that goes into this. With all the shit I do on all my squares I figured Id have done an LS swap by now but I don't want the headache
  23. 1low4x4

    2 piece rear main seal advice

    Thanks for the insight. Im not worried about it needing rebuilt, I may get to this today
  24. 1low4x4

    2 piece rear main seal advice

    Guys I think ive got a leak from the rear main seal, not sure but going to pull the dust cover and look around. I bought the good Felpro blue gaskets. Ive read some stuff about how they never really seal up. Will I be wasting my time doing this or should I give it a go. Ive heard all kinds of...
  25. 1low4x4

    Extended rubber brake lines for lift?

    Ok. Couldve sworn someone told me once that they had an option for longer lines on one of these models. Ill just order the braided ones from ORD
View older results

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,176
Members
43,338
Latest member
jw23655
Top