Search results

  1. Camar068

    weird steering column issue

    good write up for rebuilding. Download it while you can, who knows how long it will be out there. Jazzman Steering
  2. Camar068

    ORD - Steering Brace

    The bar on mine is right up against the brake proportioning valve. I loosened the bolts on the valve to allow a little freedom.
  3. Camar068

    LS 6.0 Runability Issue

    share with the locals so they lose business. I mean that's in the "hollers" hillbilly rednecking.
  4. Camar068

    Steering Gearbox Differences

    Thanks, saved
  5. Camar068

    Trans Fluid and Filter Replacement

    I haven't done mine yet so can't vouch for it but looks easy. Remove filter seal easily.
  6. Camar068

    What should I do with this toolbox?

    I put magnetic strips from amaswan in the corners of the radiator support (underneath). Helps hold tools/nuts/bolts when your working in there.
  7. Camar068

    What have you done to your square lately??

    if your going to put a winch on it, you'll have plenty of break up. Your opinion matters most though. Set the winch on there and see what she looks like.
  8. Camar068

    LMC Vent Window Rebuild

    Plenty of video's on youtube. it's tedious but can be done. Take your time and don't get pi$$y with it. I watched both, but mainly followed the 2nd video.
  9. Camar068

    steering

    That was the issue....lack of maintenance on my part.
  10. Camar068

    What have you done to your square lately??

    greasable hub ujoints? Just went thru this...10 yrs later. Lack of maintenance on my part.
  11. Camar068

    What should I do with this toolbox?

    make it the electrical tools box, impact sockets, or specialty tools rarely used. Or for household plumbing tools.
  12. Camar068

    steering

    10 yrs later, same symptom same fix. U joints out again. Picking it up tomorrow. Shop verified nothing loose or worn steering wise yesterday so I went home to ponder on it. Last night I googled "86 K10 erratic steering".....which brought me to my own post lol.
  13. Camar068

    What new tools have you got lately?

    got the straps the other day
  14. Camar068

    What have you done to your square lately??

    did the same over the past few days along with the 1" tie rod upgrade today.
  15. Camar068

    What have you done to your square lately??

    Don't know where to put it so thought I'd share here. I looked at spindles for the K10 on Amaswan, they show as $142 but there's a coupon to apply taking off $42. Worth looking at if you are ordering Yukon parts before March 23rd. 86 K10 Yukon Spindle
  16. Camar068

    K5 ls swap

    For the VSS signal, I drilled/tapped the 4l60e adapter to accept a camaro speed sensor. On the output shaft, they make clamp on reluctor wheels. Sample below....I'm sure you can get the sensor and reluctor cheaper than the link below. Clamp reluctor wheel
  17. Camar068

    About Those Synthetics and Trusting Big Names

    Warren Distribution makes the oil for supertech, and used to make it for Amazon oil (how I came across them). Back when I did comparisons and geeked a bit with the contents in oil, Amazon wasn't far from Amsoil. Amazon oil is no longer available, then I found out Warren makes Supertech so I...
  18. Camar068

    LS rear main seal leaking

    I've read enough to convince me to upgrade it while I had it apart. If anything it's gonna help. Would I strip it down just for that no.
  19. Camar068

    What have you done to your square lately??

    had the balljoints changed last year on the passenger side. No issues until last week I went thru some construction and there was a hella bump (at least 6" immediate drop making a hard left turn to get onto ramp). Thought she was falling apart.....but everything settled so I got on the...
  20. Camar068

    Lund Visor’s…if ya got one how did you install it?

    yeh seems beafier
  21. Camar068

    MY6 250 6 cylinder Swap to LS Gen 3 and TKX

    long process take your time and get it right the first time
  22. Camar068

    Experienced masters, please provide restoration guidance

    If your buying one, and daily driving it on a working mans budget, it's going to take a long time. I was gonna elaborate, but.....I think that says it all. Sh|t wears out and needs repaired before you get to the end......a few times in my case lol. Depends on your monthly/yearly budget.
  23. Camar068

    Lund Visor’s…if ya got one how did you install it?

    with the pillars, I've been thinking about having the holes welded up and putting threaded studs to bolt to. Top side, nutserts. Really miss mine lol.
  24. Camar068

    Signs of a failing proportioning valve

    getting ready to do my brakes due to drivers side locking up when wet or really cold. I've been thinking if the ptfe hoses would eliminate this issue and still be flexible? A thought to add, sorry for a 'lil hijack OP.
  25. Camar068

    About Those Synthetics and Trusting Big Names

    Type in the oil you want to look at, right click and open in new window. Go back to original window, and do again....etc, etc for how ever many you want to compare. Resize all your windows so you can do a side by side comparison. Form your own opinion with what your looking for in your oil...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,180
Members
43,338
Latest member
jw23655
Top