Search results

  1. Camar068

    Looking for advice swapping 5.3 and 6L80e into 79k20

    either way, my impression was if it had it, delete/disable it period. Looks like I was was wrong. Plenty of opinions and such on the link I posted. Thx again
  2. Camar068

    Looking for advice swapping 5.3 and 6L80e into 79k20

    Thanks for putting me on the spot. Made me read up on it again. Lots of info on AFM/DOD below. Thanks again KKG. I've got a different opinion now. AFM/DOD delete or not
  3. Camar068

    Looking for advice swapping 5.3 and 6L80e into 79k20

    Lastly and most important to me with the engine you have, look into AFM/DOD delete. Yes it's about $800 but I would do it if one was going into my truck. No I'm not rich, but one of those would not go into my truck w/o it being hardware deleted. [edit] see next post and link I posted below.
  4. Camar068

    Looking for advice swapping 5.3 and 6L80e into 79k20

    Also might want to do the 'burb tank conversion under the bed unless you need a spare tire. I went with '88 I believe and fitted the pump to the sender. Save money and build your own AN hoses. I used PAC-625 from Advance Auto for the hard line between engine and tank Areas. Good reviews back...
  5. Camar068

    Looking for advice swapping 5.3 and 6L80e into 79k20

    6l80e to np203 adapter:
  6. Camar068

    Hey from KY!

    Welcome from another KY member
  7. Camar068

    Please help! Rebuilt 700r4 rolling while in park/all gears.

    lol that was a good one.:doh2:
  8. Camar068

    LS swap DBW pedal geometry

    never heard that one. Could it be the pedal needs calibrated?
  9. Camar068

    LS swap DBW pedal geometry

    stand by.....Holler at Precision Fabrication Plus and tell them what you have. The one I got from them was for a duramax setup, but it bolted right up. I didn't want to waste money so I mailed my pedal to them and they test fitted it. You could probably trace your pedal with measurements and...
  10. Camar068

    Ambulance Vans!

    change out those top lights for spot lights and put a gun turret on it then go hog hunting.
  11. Camar068

    What have you done to your square lately??

    found out I didn't have brake lights from a co-worker. Pulled the lights and checked the typical grounds n such. Come to find out it was a blown fuse. Thinking about it overnight, I remembered I'd recently put the rear step bumper on. Sure enough, one of the wires was pinched where the...
  12. Camar068

    Made a new tool

    be good for catching antifreeze also.
  13. Camar068

    What's the first move?

    Driveline and frame (flex at the steering box) is all I would be worried about with your description. If the cab is fine except the corners and the bed floor is fine you should be fine.....again if like you said it's a steal. Fenders, doors, rocker panels, and complete bedsides can be...
  14. Camar068

    Made a new tool

    just razzin....good idea.
  15. Camar068

    Made a new tool

    or a good red neck pisser by the bon fire instead of it
  16. Camar068

    Hi from lost in the woods Missouri

    Welcome from BFKY
  17. Camar068

    Hate it or Love it, it's sweet

    Not a low rider fan so regardless of paint job, bike, ford/chevy/dodge w/e, If you gave it to me I'd sell it and never set foot in it. Similar opinion of corvettes.....something so "delicate" a body.....deserves someone else.
  18. Camar068

    What have you done to your square lately??

    very cool to document!
  19. Camar068

    77 K10 LS Swap

    yeh I think that was all due to age and having Rob Zombie going too loud when i took off to work that day lol. Didn't hear or feel anything except loss of go-go. It's been rebuilt and running good for the past year though.
  20. Camar068

    1977 10 u bolt sizes for 2 inch lift springs

    measure it?
  21. Camar068

    77 K10 LS Swap

    I'm looking at $500-600 where I want to take it. What did you pay and was it dyno? Also, did it include a shift points tune? A concern of mine was/is I did the swap and it spun a bearing 5 yrs later and I rebuilt it. But between those 2, I've never had it WOT.....too scared lol.
  22. Camar068

    Hey hey from the Gulf of America

    Welcome, spent my HS days in the Troy area in the 80's
  23. Camar068

    What have you done to your square lately??

    Whats it look like installed? Maybe convert to cold air intake on the cheap side?
  24. Camar068

    What new tools have you got lately?

    got a monocular for $450 on optics planet for hunting. Can be used for animal ID, tracking, deer down tracking/ID, or stuff around the house as well looking for insulation leaks and such. as bad as some of the guys at the "farm" are at shooting deer, it will come in handy and save time. Also...
  25. Camar068

    Oil pressure sender stuck.

    IMO, I prefer a gauge. You learn where it's normally at and if your smart you keep an eye on it and use your judgement. Lets you know when issues are coming before that light comes on. A long (hours) drive, I understand the light....hard to keep an eye on those gauges on a long drive.

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,340
Latest member
hauto85
Top