Search results

  1. Goldie Driver

    only Front Brakes Skid in a dirt parking lot

    No, a plug on the drum. Dodges in the late 70s had a hole in the backing plate but GM did not in my experience. Makes adjusting the shoes more difficult.
  2. Goldie Driver

    only Front Brakes Skid in a dirt parking lot

    Not sure on an 89 , but on Goldie (1980) the OP is right - the adjustment hole is a knock out plug on the drum. Aftermarket ones don't seem to have it ... Also, being an 89, could it have RWAL ? (Rear wheel anti lock) If so, sounds like it works as designed.
  3. Goldie Driver

    Reverse Light Issue

    If it is the ratcheting style I remember the trick being to put the column and truck in low and rotating the ratchet part of the switch full stop clockwise. When you go back to park it automatically adjusts. This style would be all plastic and snap in place on the column not using the 2 small...
  4. Goldie Driver

    1971 Dart Swinger

    I guess I missed it, but what was foolish about the seal install ?:think: Keep up the great work on your projects - most impressive. :waytogo:
  5. Goldie Driver

    What are these wires?

    That other connector looks funny, but, I think it's your answer. This pic is from the internet and a 3rd Gen Camaro but same idea.
  6. Goldie Driver

    What are these wires?

    The 1st plug is cruise. No idea on the 2nd, but a free bump ! Britt
  7. Goldie Driver

    Front discs won’t release

    Glad you found it. I had a master cylinder fail on Goldie and fronts would lock, but you could wiggle the pedal and ultimately free it up. I have never had one fail like that-usually it is that pucker inspiring foot to the floor pedal operation. :eek: Hopefully your replacement does well for...
  8. Goldie Driver

    Rear Brakes Locking Up

    Yup. Large line up front and connected to the right of the spool valve switch.
  9. Goldie Driver

    Rear Brakes Locking Up

    Well, here is my old one I saved in a plastic bag in the garage. So much for protection from the Houston humidity... :eek: However, it does show the front chamber is smaller. The front is to the right. I never knew.
  10. Goldie Driver

    Wiper Issues

    No idea, but a question- does the dash light switch work for the lights ? I am at a loss as to what wiring in the column could cause the dash lights to come on as the only other wiring in the column is for the turn signal switch and cruise if equipped.
  11. Goldie Driver

    Lost Power to Power Windows.

    If you jostled the 2 connectors on the ignition switch it could be causing power issues. I recently had weird blower issues - neither would work , then would- that turned out to be a bad spot on a terminal of the ignition switch. Blower requires key on power. Your power window issues could...
  12. Goldie Driver

    Rear Brakes Locking Up

    Actually, I was doing a little research on my work computer earlier today so can't link it but found a video of a 78 with the same set up and a you tube video showing that the forward ports on older cars often power the rear brakes. So , I believe it is factory. Doesn't explain why my issue...
  13. Goldie Driver

    Lost Power to Power Windows.

    I wonder if a ground on the bus bar up by the parking brake pedal is loose. Or, if somehow one of the plugs on the ignition switch is loose. Just a wild guess based on the worked before. Good Luck !
  14. Goldie Driver

    AC & Heat selection and vents

    The hot and cold select is a cable operation so I am guessing that is not hooked up. Sadly you would have to get back in to the dash to see. The others are controlled by vacuum and I would check to see if the main supply under the hood is still connected.
  15. Goldie Driver

    Rear Brakes Locking Up

    OK - I believe this picture is correct. Now, I would have ASSUMED the rears get a smaller line versus the fronts. That is not the way my 1980 half ton is plumbed and you can not reverse the fittings on the master cylinder- different sizes. I tried and found out. :anitoof: So - is my stuff...
  16. Goldie Driver

    What have you done to your square lately??

    Looks like an analysis of the Valvoline R & R 5W30, but was there something else I was missing? Thanks ! Britt
  17. Goldie Driver

    Apple don’t fall far from the tree

    I assume a transplant was done ? :patriot:
  18. Goldie Driver

    Nylon cam gear years

    Stumbled across this post the other day. Can't tell you the pitch but it may help you ID the fan. https://www.airforums.com/forums/f310/radiator-fan-clutch-woes-155571.html#post1866681 Scroll up for the full thread.
  19. Goldie Driver

    REDS NECK REPARES!~

    Speedi Sleeve on the old axle? Reuse the old seal ? Seems like a lot of work for a bandaid but not sure how to beat a leak without a reseal. I guess no one makes a diff stop leak product. :anitoof:
  20. Goldie Driver

    Can anyone tell me what this is??

    Emissions = Federally mandated . Can't escape it in larger counties. Safety = Not required by the Feds. FREEDOM! :rofl: I actually 100% follow you about safety inspections but it is (now) what it is.
  21. Goldie Driver

    Hello from New England

    Welcome from Houston, Texas, and a fellow Sub owner. More pics, please. :Big Laugh:
  22. Goldie Driver

    What have you done to your square lately??

    Swaybar mount on. My poor OE bushing got squished by the wrong mount. :eek: Hopefully it will regenerate it's shape :cool:
  23. Goldie Driver

    What have you done to your square lately??

    What I will be doing later - more swaybar bracket fun. Both LMC styles here along with the broken OE one and a ~10 dollar one from Vato Zone that came WITH a bushing. You tell me. AZ part number FA1655 and the LMC part nos are visible. :anitoof:
  24. Goldie Driver

    Nylon cam gear years

    To each, their own. I am not a fan of timing belts either as I see that as a planned obsolescence. Timing chains are typically a life of the engine item if the engine is maintained and the gear & chain are metal in my experience. Most of the nylon coated ones I saw failed around 70K.
  25. Goldie Driver

    Nylon cam gear years

    I thought that was a 70s only dumb idea. :anitoof: I was obviously overestimating their ability to correct previous errors...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,186
Members
43,338
Latest member
jw23655
Top