Search results

  1. mjck5

    k5 rear window

    i have an 86 k5 with electric rear window, when window is rolled down all the way it sticks about a 1/2 inch or so above the top of the tail gate, its been like this since ive owned it, i had to replace the rear window once because some one loaded something heavy into the back without opening...
  2. mjck5

    86 k5 tail pan replacement

    heres what im dealing with
  3. mjck5

    86 k5 tail pan replacement

    yeah i saw that video, unfortunately he just patched his and didnt remove it, i dont think mine is salvageable enough to just cut out the bad parts
  4. mjck5

    86 k5 tail pan replacement

    is it welded in or bolted in, hard to tell on mine with how rusted out it is but it allmost looks bolted in
  5. mjck5

    k5 tail pan replace

    hello all, i have discovered my tailpan in my 86 k5 is pretty well rotted out, from what i can see it looks like this is just bolted in with the floor spot welded to it, has anyone out there dealt with replacing this? any info/advice would be greatly appreciated
  6. mjck5

    86 k5 tail pan replacement

    hello all, i have discovered my tailpan in my 86 k5 is pretty well rotted out, from what i can see it looks like this is just bolted in with the floor spot welded to it, has anyone out there dealt with replacing this? any info/advice would be greatly appreciated
  7. mjck5

    dual exhaust kit

    was curious if anyone out there has installed a Dynomax Header-Back Dual Exhaust Kits 89005 on a k5 blazer, if so id love to see some pics of how the final product looks
  8. mjck5

    86 k5 long tube headers

    he said the tube coming off the first cylinder on the passenger side wouldn't clear the motor mount
  9. mjck5

    86 k5 long tube headers

    does any one have any recommendations for a decent set of long tube headers that will bolt up to an 86 k5 without any modifications (besides the a/c bracket)? bought a set of jegs headers that said they were for a k5 but my mechanic says they dont fit, what have you guys used and had good luck...
  10. mjck5

    hei vacuum advance stop plate

    couldnt find any info on what the centrifugal advance for this distributor is online, ill have to call accel in the morning and see if they can give me any more info. one thing i didnt think of before, do i need to take into consideration the cam? it has an rv cam does that change anything?
  11. mjck5

    hei vacuum advance stop plate

    its the accell 59130 going into a 400sb no egr, nothing fancy with the heads just stock, the motor was bored .030over and put in an rv cam
  12. mjck5

    hei vacuum advance stop plate

    ok, appreciate it, so sounds like i should just leave it off when i first install it, ive never dealt with setting the timing curve or any of this so im pretty well clueless at this point
  13. mjck5

    hei vacuum advance stop plate

    so is it just trying different ones until you like it? the plate it came with has 5 thru 8, 8 thru 11, 11 thru 14 and 14 thru 17, i havent the slightest clue which to start with or if the plate is even necessary
  14. mjck5

    hei vacuum advance stop plate

    i am replacing my intake manifold gaskets and i figured id put in new hei distributor while im at it, seeing as how i need to remove distributor anyways, im replacing it with an accell hei, when i opened the box it comes with a vacuum advance stop plate, my question is do i need this? and if so...
  15. mjck5

    distributor removal

    quick question for you guys, im replacing a bad intake manifold gasket(at least i hope thats the problem) my question is how important is it to have the distributor at tdc? or do you just have to make sure it goes in in the same position it came out? advice is allways appreciated
  16. mjck5

    hei distributor

    whats a good recommendation that wont break the bank
  17. mjck5

    hei distributor

    its the stock distributor and i got rid of all the esc stuff, when i changed the cap and rotor it was pretty rusty and nasty looking inside, i was looking at a mas distributor online i think it was 60 or 70 bucks, im just not sure what the difference is in the rpm ranges
  18. mjck5

    hei distributor

    i am planning on swapping out my stock 86 distributor with new hei, i see them at 6500rpm 7500rpm and 9000rpm, hoping someone could tell me what the difference is in the performance, its going in a 400sb with rv cam so not a race car
  19. mjck5

    new member k5

    new member here, this is my 86 k5, been sitting for better part of 20 years time to get her back on the road
  20. mjck5

    Charcoal / vapor / evap canister, how it should be set up and other information

    will do
  21. mjck5

    Charcoal / vapor / evap canister, how it should be set up and other information

    been going crazy trying to find this kind of info online, i have an 86 k5 blazer that i swapped out the 305 with a 400, deleted most of the emissions stuff and have a after market edlebrock carb, this thread has help tremendously. thank you i know this is a very old thread but im hoping this...
View older results

Latest posts

Forum statistics

Threads
48,413
Posts
1,066,849
Members
42,795
Latest member
MRmolash
Top