Search results

  1. RanchWelder

    Transmission Swap Mishaps

    The GM 205 is divorsed... the case cover is different than the Ford or the Dodge which is NOT divorsed. My 208 had the auto locks and they are available for anyone who needs them as good known to be working cores. Shifting into low and getting stuck is usually from the plastic shifter fork tabs...
  2. RanchWelder

    80 C10 "Nemo" Build - Started as: Front frame buckled…

    It's got at least another 2 season's of the Duke's of Hazzard left in her! If you flip it on to the roof a few times, it might straighten it out. I typed this smart axx remark and missed all the recent posts... You burned all of us with the 1985 picture! If it was an 85' there would have been...
  3. RanchWelder

    80 C10 "Nemo" Build - Started as: Front frame buckled…

    That's my point. You'll feel great driving while your tires get eaten up or find out the hard way when somebody cuts you off and the steering breaks loose. Caster can be deadly at high speeds. Unless you're a Hurricane Hell Driver and can stay in control on 2 same side wheels... at a 30 degree...
  4. RanchWelder

    80 C10 "Nemo" Build - Started as: Front frame buckled…

    Yah ^^^ what he said. You are likely going to have to pay to have it straightened or find a donor frame with a clean title. Good luck. You might be able to square it up by pulling the engine, cutting the cross member out and installing an ORD cross member. I would call them and ask about the...
  5. RanchWelder

    Throttle Body Base... 17087004, TPS...

    No longer available for sale. Trade considered for parts ONLY.
  6. RanchWelder

    Quad-Jet 17085003

    Traded for old worn out auto parts. Item is no longer available.
  7. RanchWelder

    5 Pin Ignition Module / 1103465 HEI Distributor (for specific Electronic Spark Control Engines)

    All sale items are no longer for sale. Trade for parts offers ONLY.
  8. RanchWelder

    Dash Gauges / Cruise Control Module 1994 Burb

    All sale items are no longer for sale. Trade for parts offers ONLY.
  9. RanchWelder

    ECM 1619742 x2, Transmission Module INCLUDED

    All sale items are no longer for sale. Trade for parts offers ONLY.
  10. RanchWelder

    OEM Overhead Console Heater A/C Blower Control, Includes Pig Tail

    All sale items are no longer for sale. Trade for parts offers ONLY.
  11. RanchWelder

    Some squares for sale in my area.

    If the bed was blasted and painted, it would be worth the $2K, without the truck.
  12. RanchWelder

    What new tools have you got lately?

    The load at RPM and the torque variation under stress, is no where near what a screw gun, drill or ratchet gun is designed to do. High RPM dogs the batteries. = Fail. If you are shaping glass or guitar bodies, I can definitely see how it's handy. Or like you mentioned, the occasional rusty bolt...
  13. RanchWelder

    What new tools have you got lately?

    We had a guy use the very expensive 18V Milwaukee grinder, with the blue overlap sanding disks for simply re-sharpening the New Holland Swathe cutter blades and it did not last a month before it burned up. Do yourself a favor and stick with power corded grinders. Run a cocktail of 90 weight...
  14. RanchWelder

    What new tools have you got lately?

    This is new: Cutting the filters on the tractors and truck engines is worth the effort, in the long run. This comes put together backwards. Had to pull the bolts on the cutter wheels and the screw block and reverse them end to end. 10 minutes and fixed. All the bad reviews are from people too...
  15. RanchWelder

    Old, retired guy new to this group.

    Seen a 66lb catfish in the trunk of a Montecarlo one afternoon. After the guy who caught it drove around town showing it off, it shrunk 5 lbs and he lost the world record catfish! Long Live the Catfish!
  16. RanchWelder

    Locking Hub Body Won't Seal To Hub

    I used silicone o-rings on my MM locking hubs. They have never leaked. Bought a hundred 75mm x 2mm. Grease them up well and they fit the MM hubs perfect without fail. (The Self Locking OEM units I pulled from my stock GM 10-bolts, are available for anyone rebuilding a factory restoration truck.)...
  17. RanchWelder

    Gave away my LS

    I have to agree. If you match what you pulled apart by de-greeing everything as close as possible, the rotational mass should only vary by a few grams at the most. I'm convinced it's not rocket science, just good basic set up and detailed balancing. From what I've read, the wheels off the...
  18. RanchWelder

    Headlights and blinker problems. Again!!

    I rewired with four 3-wire lamps. I used two 40A relays and 12ga wire for the lights and 14ga for the ground circuit, in a custom made harness. I bought the ceramic connectors with the heavier gauge wires, since some came with sub standard wires. This 87 had a pair of lights with 2 poles and a...
  19. RanchWelder

    Blue Print or GM Performance

    My truck came with a Marine 5.7L with Forged Pistons and the GM performance Crank. I used the EDL-7116 dual plane intake, a 1" tall Chaos split 2" diameter holes' TBI adapter (and the stock 5.7L TBI, for now). The adaptor allows for the upgraded larger bored TBI and a tune/chip or the Holley...
  20. RanchWelder

    700R4 Governor Malfunction/Replacement and Custom Pressure Gauge Installation...

    Nah, your cool.
  21. RanchWelder

    700R4 Governor Malfunction/Replacement and Custom Pressure Gauge Installation...

    Well, the NAPA is $123.00 shipped... Had a 300psi gauge and figured others might also... ...and the brake line is rated to 1200PSI over the cheap rubber hose they give you with crimped brass ends, (which would not be as good as a stainless line for permanent install. The parts I listed comes...
  22. RanchWelder

    Shorter steering column?

    Yah, the stoopid expensive Borgeson Shaft, hurts my eyes every time I get bored and search for one on sale. I have an inner tube wrapped and zip tied over my upper socket joint, just to keep the grease in and the water out. It works OK. Made a Delrin bushing to replace the lower bearing race...
  23. RanchWelder

    Hello from West Virginia

    Right On! Hot Rod the Bread Truck!
  24. RanchWelder

    What's the best way to drain the gas tank?

    You can ingest three our four ounces of fuel before it makes you puke... man up and do it old school. It burns your eyes when it come back up through your sinuses though... :flame:
  25. RanchWelder

    '88 GMC R3500 DUALLY W/350 TBI and idle closed loop problems.

    If you pull the EGR circuit connector and stick a wire between the pins, it will help determine if there's an issue with EGR system, the vacuum port of the switch clogged up or broken / bad connector wiring. Shorting the 2 wire connector with a wire or paper clip, tells the computer you have a...
View older results

Latest posts

Forum statistics

Threads
48,401
Posts
1,066,548
Members
42,778
Latest member
Skippy
Top