kennythetruck
Member
- Joined
- Jun 9, 2025
- Posts
- 31
- Reaction score
- 143
- Location
- Brighton Mo
- First Name
- Ethan
- Truck Year
- 1987
- Truck Model
- R10 silverado
- Engine Size
- 4.8
Good morning I completed my first Ls swap last year. When I bought the PSI harness I did a complete kit from them for DBW( pedal, tac module, pedal harness etc) I had them wire it for cruise control and have them tied up under the dash. I’m now ready to try and finish that portion of the install.
2006 4.8 and 4l60e
Trucks been completely rewired with a painless wiring harness
PSI Ls harness
I am wanting to wire the cruise control to the stock turn signal stalk that has the cruise functions. I have emailed PSI for them to send me the directions again on wiring this up as I seemed to have misplaced them.
I’m sure there’s someone here that has done this exact swap. What do I need to finish it? I remember it talking about relays but can someone give me some insight? I’m not afraid to tackle it. I’m not a wiring guru but I can struggle through it with the best of them
Thanks
For any feedback!
Ethan
2006 4.8 and 4l60e
Trucks been completely rewired with a painless wiring harness
PSI Ls harness
I am wanting to wire the cruise control to the stock turn signal stalk that has the cruise functions. I have emailed PSI for them to send me the directions again on wiring this up as I seemed to have misplaced them.
I’m sure there’s someone here that has done this exact swap. What do I need to finish it? I remember it talking about relays but can someone give me some insight? I’m not afraid to tackle it. I’m not a wiring guru but I can struggle through it with the best of them
Thanks
For any feedback!
Ethan
