Recent content by teamssc

  1. T

    Exhaust Pipe Diameter

    Thanks for the positive vote on the Walker pipes. I talked with a guy at work who builds muscle cars and he said I'm fine also. He said the 2 pipes are different diameter coming off the manifolds because of the bends in them; thus it's by design to get the back pressure balanced just as you...
  2. T

    Transmission rebuild installed now small leak

    I appreciate the feedback. Actually it's an O ring on the transmission to adapter side and a gasket on the transfer case side. I didn't realize there was a gasket so I didn't have one and we pushed through the install because we both weren't going to have a Saturday to work on it for at...
  3. T

    Exhaust Pipe Diameter

    I'm replacing the dual exhaust on my 78 K10. I'm using the K20/350ci diagram on the Walker site. I'm suprised that the Walker site has 2.5" on the drivers side and 2.25" on the passenger side, back to the muffler that is. I bought all the pipe based on their diagram and it just didn't click...
  4. T

    Transmission rebuild installed now small leak

    No ideas? :(
  5. T

    no end play th350

    Follow up to TKBP4him's post (as he was doing the trany for me). It went in 2 Saturday's ago and the 4WD transfer case went in this Saturday and it..... DRIVES! Rock and roll! Thanks Tony (TKBP4him)!!!! :winner_third_h4h: So I started another thread about a small leak we have and we can...
  6. T

    Transmission rebuild installed now small leak

    We just finished a TH350 rebuild and got it and the NP203 transfer case installed. Now we have some fluid, a leak, showing up around the support where the tranny and transfer case meet up. We had a rough time aligning the transfer case and it took a lot of effort pushing it on. The leak is on...
  7. T

    no end play th350

    Let me add to tkbp4him's post, since it's my transmission he's rebuilding, it turns clockwise and counterclockwise. The problem is the shaft won't move up and down (in and out), but it turns fine. I've also been reading a lot on it and there are some good ideas we'll look at. Just thought I...
  8. T

    Can't remove front planetary gearset

    In the end it was pretty painless to get off. We went to Autozone and borrowed a gear puller. Using that with a dime on the shaft the gear came off almost like it was hardly stuck. In fact we didn't even use a wrench on the gear puller and just turned the bolt with our fingers. Once off we...
  9. T

    Can't remove front planetary gearset

    Yes HotRodPC, that's the part. We do have the snap ring off so it's got to be something with the spindles. It's like there is a second snap ring, though I know there is not, so it's got to be some slight damage on the spindles based on what you are saying. I'll see if my buddy has a gear...
  10. T

    Can't remove front planetary gearset

    Having trouble with the planetary gearset removal on a TH350 (1970's). We can't remove it from the output shaft. On another transmission disassembly it came off easy once the small snap ring was removed. On this current rebuild the small snap ring is removed but we can't get the planetary...
See more

Latest posts

Forum statistics

Threads
42,298
Posts
913,277
Members
33,797
Latest member
70meyers
Top