Steelbuddha's latest activity
-
Steelbuddha replied to the thread What did I do wrong? NV4500 Swap Issues.Measure everything, take nothing for granted. You'll figure it out. -
Steelbuddha reacted to YakkoWarner's post in the thread I figured out what caused my truck to lose power, but I don't want to fix it by repeating old (incorrect) wiring! with
Like.
If thats the primary power output, I'd consider 10 gauge or maybe even 8 (10 is normally good for 30 amps, 8 is good for 40 amps but in... -
Steelbuddha reacted to wccasey75's post in the thread Hello from Savannah, Georgia - 1986 C10 Silverado with Like.
Hi, all. Currently fixing up a 1986 C10 Silverado long bed. Mostly interior restoration (Dash, headliner, sound deadening, carpet, seat...
-
Steelbuddha reacted to bucket's post in the thread What did I do wrong? NV4500 Swap Issues with Like.
Is the clutch disc possibly installed backwards? I didn't see that question asked yet.
-
Steelbuddha reacted to Bextreme04's post in the thread What did I do wrong? NV4500 Swap Issues with Like.
Do you have a 90's 454 in it? The flywheel for a Mark IV will be very different than one for a Gen V or Gen VI 454. Gen V and Gen VI are...
-
If you have power on one end of a fuse,or breaker,and no power on the other side of the fuse or breaker. The fuse or breaker is bad. How...
-
After re-reading this.... you don't have a fuse in there. The metal "fuse" is a self resetting circuit breaker. I would go buy a new one...
-
I'm confused by what you are saying? With the fuse pulled... you will have 12v on the supply side(left) and 0v on the line to the door...
-
Steelbuddha replied to the thread New guy from IL.Howdy from down south! Nice-looking rig.
-
Steelbuddha replied to the thread Tire size or possible lift recommendations for the 79’ K30.My 67-year-old ass concurs. Lifts are all fun and games until you have to actually use the truck ;).
-
Steelbuddha reacted to Goldie Driver's post in the thread Tire size or possible lift recommendations for the 79’ K30 with Like.
My 60 year old opinion :rofl: is it has a good stance now and adding a lift will be dollars, labor, and possibly driveshaft issues for...
-
Steelbuddha replied to the thread E85 conversions considering gas prices.Feeling quite a lot better about my 8.5mpg, thanks. I only use ethanol for mixing shellac and for medicinal purposes.
-
Steelbuddha reacted to Radiohead's post in the thread E85 conversions considering gas prices with Like.
Ethanol free is the ONLY way to go in yard equipment and such. Every year I make money off people not following that advice and then...
-
Steelbuddha reacted to Ricko1966's post in the thread I am pretty sure my Charcoal canister is Clogged! with Like.
The 3rd pump line is just a return to the tank,not to the vapor canister. The vapor canister does vent your tank,if its not venting you...
-
By "cam", do you mean the turn signal switch? The cancel cam is the collar on the steering shaft that has a couple bumps on it that...
