Ricko1966's latest activity
-
ROr have both wheels off the ground. If posi, it will also need to be in neutral.
-
RRicko1966 replied to the thread Should rear wheel spin freely?.If it's posi both wheels need to be off the ground.
-
RRicko1966 reacted to bucket's post in the thread Ignition control module dwell programming with
Like.
Iirc, red and white are the other colors besides the common red and yellow. -
RRicko1966 reacted to Turbo4whl's post in the thread Ignition control module dwell programming with Like.
May not help, but I do know there were 2 different coils used in the HEI. The parts list would have a foot note asking what color the...
-
RRicko1966 reacted to Nardulli's post in the thread Accel HEI Super Coil (140003) Magic or Trash with Like.
Well, I have the Accel unit. It is cheaply made, and I was having all manner of issues. I pulled it and replaced it with a GM OE unit...
-
RRicko1966 reacted to PrairieDrifter's post in the thread Accel HEI Super Coil (140003) Magic or Trash with Like.
Couldn't tell you. My initial is about 11-12. I haven't touched it in a few years since the msd is good, so I don't remember my total or...
-
RRicko1966 reacted to bucket's post in the thread Accel HEI Super Coil (140003) Magic or Trash with Like.
I guess I should also say, they "look" identical to the GM parts. I've bought many, but haven't needed to swap anything out on any of...
-
RJumper your OBD1 A and B terminals. Without starting the enngine, turn your ignition on. Your SES light should flash once, then twice...
-
RRicko1966 replied to the thread Finally got a running 65 C10.For one thing too many sizes, types and preferences. And most guys don't change them with cam swaps,most change them at valve job time...
-
RAgree about the balancer. Also check your motor mounts, they could be cracked or totally shot and you would feel vibration. My...
-
RRicko1966 replied to the thread TH400 Kick Down Solenoid.Do you have power to the switch? And power to the solenoid?
-
RRicko1966 replied to the thread Down 1 Cylinder.Swap plug and wire between 2 cylinders,see if the problem follows the move.
-
RRicko1966 reacted to bucket's post in the thread Best way to transport 19 55 gallon barrels? with Like.
I believe it was probably both of us that would have mentioned treating the wood with diesel. For your trailer connector, you can get a...
-
RRicko1966 replied to the thread Ignition control module dwell programming.Busy AF and driving right now,sorry. I have no specs on Delphi I wish I did
-
RRicko1966 replied to the thread Finally got a running 65 C10.I suggested 200 because it's literally a few hours swap you even reuse the driveshaft.
