Ricko1966's latest activity
-
RThanks Ricko1966. The Y pipe that was on it was homemade and the left side wouldn't allow me to utilize all 3 gears of my trans as the...
-
RRicko1966 reacted to Intenseblue's post in the thread OEM cylinder head castings - 1977 K10 with
Like.
You are correct in that I am not familiarized with all of the different markings and their associated castings. I am with double humps... -
RRicko1966 replied to the thread Exhaust downpopes.Your truck never had 2 stock downpipes,that's why you can't find them. Your truck had a Y pipe. You will need to obtain and butcher a Y...
-
RRicko1966 replied to the thread Weird solenoid looking thing.The ESC controller is a silver box mounted behind the glove box I'll post a pic,there is a 4 wire harness that leads to the firewall...
-
-
RRicko1966 reacted to Matt69olds's post in the thread Instrument cluster questions on new build with Like.
There are different sending units based on gauge readings. Meaning a gauge that reads to 60psi, requires a 60psi sending unit. I ran...
-
RRicko1966 replied to the thread Accel HEI Super Coil (140003) Magic or Trash.Oh no,I'm not in any need right now,I was but found and bought a good GM HEI that satisfied my needs at the time. If you do ever mess...
-
RWhoa! Are you going to send it back for an exchange?
-
RRicko1966 replied to the thread Accel HEI Super Coil (140003) Magic or Trash.So how many degrees of timing including vacuum advance do you have at highway cruise? Is that with functional EGR or without EGR? Those...
-
RRicko1966 reacted to PrairieDrifter's post in the thread Accel HEI Super Coil (140003) Magic or Trash with Like.
I would say the only thing they really need is lighter advance weight springs. For a truck anyways. Which they supply when you order the...
-
RRicko1966 replied to the thread Accel HEI Super Coil (140003) Magic or Trash.See,I suspect they have a very lazy curve, and a vacuum advance that doesn't add much to total,leaving a lot of timing out,so they don't...
-
RNot with that attitude...lol.. Kidding aside, I do agree, it's not a gear banging tranny, it's a workhorse tranny, but it can be...
-
RThere's two issues regarding turn signals. Different polarities and the flasher. Look for LED bulbs that say "non-polarity". These have...
-
RRicko1966 replied to the thread OEM cylinder head castings - 1977 K10.Wasn't bagging on you,was just thinking you didn't know the markings by number and knew you didn't want double humps which 186s are...
-
RRicko1966 replied to the thread OEM cylinder head castings - 1977 K10.Do some investigating on 601s I think they may be what you are looking for.
-
RRicko1966 reacted to bucket's post in the thread Accel HEI Super Coil (140003) Magic or Trash with Like.
Right, but they already have this one. To replace it would cost them money.
