RanchWelder's latest activity
-
RanchWelder replied to the thread Proportioning valve for 13" Brakes: 14-Bolt swap.Sourced a new Master Cylinder from a 1987 1 ton with 13" brakes. 1-1/8" master cylinder piston, vs 1" for 11" brakes. Still interested... -
RanchWelder replied to the thread WTB Consoles, Orig. '81-'91, Blazer/Jimmy/Suburban.I have one for you Rusty. Tan. No damage, just a little dirty. The spring is there and disconnected so you can flip it back as a drink...
-
-
RanchWelder replied to the thread Hanging I-Beam from ceiling joists.This system braces the roof joists upwards. Force the roof joists up, instead of hanging from any engineered roof truss, if you can...
-
-
I laid a 4x4 across 8ft of rafters and put a chain hanging from the middle. Had no issues lifting the box off and putting back on by my...
-
RanchWelder reacted to brooksman9's post in the thread Hanging I-Beam from ceiling joists with
Like.
Supports in. Just need to go get my trolley. -
RanchWelder reacted to brooksman9's post in the thread Hanging I-Beam from ceiling joists with Like.
Still need to add some collar ties and drop down supports but the beam is hung.
-
Keith's suggestion is what I did in my shop. The problem is you would not he able to use the short rail you have. I had to go with a...
-
That’s a cool way to do it. I just drilled some holes in angle iron and stretch a tape across. I’ve altered the holes a few times for...
-
RanchWelder reacted to Grit dog's post in the thread Let's see those 4x4 Squares On Dirt! with Like.
Closest this pavement princess gets to dirt! Lol
-
Okay, it's on dirt. It's also my front yard.
-
RanchWelder replied to the thread Anyone use these Littelfuse zcase terminals before?.The location your battery lives, is ideal for this unit. So close to the firewall, it's really the same as the firewall mount. Most of...
-
RanchWelder reacted to Frankenchevy's post in the thread Anyone use these Littelfuse zcase terminals before? with Like.
Rerouted the cable from the alt and l/r batt crossover, as well as the larger fused loads. The way they’re routed, there’s negligible...
-
RanchWelder replied to the thread Anyone use these Littelfuse zcase terminals before?.It's cool. If you're good with it then make it rock. The covers look like they work well. I was wrong about the 300A bars they are as...
-
RanchWelder replied to the thread Anyone ever make/crimp their own high pressure hoses?.Agreed. 350 is your surge max. Air is different than fluids and the burst increases on a slide. Usually hard lines for your application...
-
RanchWelder replied to the thread Anyone ever make/crimp their own high pressure hoses?.Money is so tight everywhere Doppleganger. Can you think of a way to mod a pair of hard lines or using the old fittings with slight...
