Update I put on a new radiator, 2inch spacer and put 8n a 180 tstat in now I am running just above the half way line on gauge this morning hoping that is where is will stay
So update I got a laser thermometer and at the er block where temp sensor it was 242 and I also noticed a 40 degree temp difference from left side to right side of radiator which makes me believe I need a new radiator again thanks for all the help I am also putting a 2 inch spacer on my fan
Idk if rad is stuck or not I bought this thing 2 months ago and the kid seemed like a schmuck. There are toggle switches everywhere, a wiring nightmare so I'm not sure what all he did to it
I have not verified temp with a laser due to not having one. While sittingvtruckvruns right at the start of the red on gauge and while driving it's closer to the third hash mark. My fan set up is just the blades bolted to the water pump driven by belts and harmonic balancer and a stock plastic...
Well I used a block tester and fluid did not change so head gasket should be good, I had already ran that test but forgot to put in original post. I have a fan shroud. It runs hot all the time my gauge used to peg hot right away but after replacing tatar and water pump gauge slowly gets hot and...
I've replaced tstat water pump temp sensor temp gauge upper radiator hose bleed air out of system and it still runs very hot and also replaced radiator cap too I don't have a clutch fan so my fan runs all the time I cant figure out why I'm still running hot I flushed radiator water ran through...