K5Rob's latest activity
-
KK5Rob replied to the thread Floor and rocker options.TotallyHucked, you dont happen to know what the underneath of the back floor (bed) and the step-up from the front floors is supposed to...
-
-
KK5Rob replied to the thread Floor and rocker options.What are we doing about this area? Are people making their own panels or is something else available?
-
KK5Rob replied to the thread LS regasket question.Okay, good idea. Thank you for the advice
-
KI have the mr. gasket crank seal tool and a different front tool I ordered. I just made a flat bar to bolt on for the oil pan. I...
-
KK5Rob replied to the thread LS regasket question.Is that amazon kit any good? I already have the mr gasket front tool from doing a cam swap years ago, and the rear tool i have coming is...
-
KJust save yourself the trouble and buy the tool set. They are like $20 on amazon. You should have a front, rear, and pan tool. Bolt the...
-
KK5Rob replied to the thread LS regasket question.Thank you for the help, I really appreciate it. Will be doing this as soon as my rear main seal alignment tool comes in.
-
KThen the last step is checking the alignment of the back of the pan to the back of the block. I used the same 12" straight edge for this...
-
KHere's what I mean by holding the straight edge at an angle, you wanna get as much on the pan itself and the out to the ears of the...
-
KHey guys I have a 2004 5.3 LM7 that I want to regasket the oil pan, timing cover and rear main seal. I know they align with eachother...
-
KK5Rob replied to the thread Floor and rocker options.Will do, thanks Zelph
-
KI would advise to brace the area around the front seat, rear bolt holes. The way the seat frame is so short and the seat overhang adds...
-
KYeah, we have 2 more pieces for the floor, but that's about it. We're looking into doing more for the Blazers but haven't really gotten...
-
KK5Rob replied to the thread Floor and rocker options.Thank you for the information. I took your advice and placed an order. Just wondering. Is there anything available for the middle...
-
KHey Rob, I actually work for AMD, hopefully I can shed some light. Throw some pictures up if you have that, pics always help. The "drop...
