JamesSam's latest activity
-
I'd try 2 bolts screwed into a coupling nut. Use them as a wedge to push on the lower ball joint stud leave the ball joint nut on but... -
Or a fat passenger. Everybody leaves that one out.
-
Huck got most of your questions answered it seems. If you pay attention at shows all these trucks lean one way or another. Just try...
-
Good to know. It’s hard to see up in there with the spring still in. I tried to get the lower ball joint out this afternoon, but it...
-
I'm the same way, my truck sits ~3/8"-1/2" lower on the pass side front, just cuz I didn't cut the springs the same and have never fixed...
-
Hey, don’t talk about my wife like that.
-
You’re speaking my language. I just got a 3/8” spacer off scamazon, which by all reports means roughly translated .75” correction, and...
-
Or he could get a fat passenger. Just thinking out loud here.
-
Ya tough call. If the truck is otherwise straight then you could put a little coil spacer in the saggy side and see how it looks. 1/2”...
-
Welcome from Missouri.
-
JamesSam replied to the thread New to me, 2004 Avalanche.Yep. My goal for a daily in the next 3 to 5 is a full cab GMC mid 2000's or a Chevy Avalanche full cab that will replace my current...
-
I am not the 700R4 guru, but getting the throttle valve cable adjusted correctly is very important. Since you are running an aftermarket...
-
Do you have a correction arm on the carb,and the correct bracket on the manifold?
-
JamesSam reacted to Burbinator86's post in the thread 700R4 Transmission Questions/Issues with
Like.
Hello all. I’m new to the forum and new to Squarebodys. I have a 1986 GMC Suburban K1500 with a 350 and a 700R4. I’ve had it roughly 2-3... -
JamesSam replied to the thread Happy to be here..Welcome from VA. Stepsides are the coolest. Please post some pics...
