Recent content by ice205

  1. I

    Doing a 18 inch total lift s.a.s

    Hi all , been awhile , have ? I'm in helena, mt .. Waiting on parts for my lift ,yes I'm doing a s.a.s I have a dana 60 super duty large axel tube out of 2003 ..my ? Is to align the output on t case ..to the pumpkin correctly . (If looking from front of truck ) it should have a left and right...
  2. I

    1995 suburban lt 4x4

    ok here we go .......i replaced the fuel pump and throttle position er ..and when i excelerate it acts like it loses all power like no fuel ..idols fine give it gas and it acts fine for a minute then acts like it will die but dont ...check engine light dont come on so any info would be nice .....
  3. I

    electrical

    anything running would be the factory clock and my memory for the radio....everything else is disconnected ............thx all
  4. I

    electrical

    ok ive checked all my wires .battery is new ..altanator new .....ive rewired many times and checked with meters ..after a few days if i let my truck sit like 3-4 days battery is dead ....? can the regulator in the altanator be stuck to where power would be lost ......? hell im to the point of...
  5. I

    where to get ...

    does anyone have a site that shows the parts list and prices on 8-12 inch lifts
  6. I

    lift kit for 85

    its a starting place ..............
  7. I

    lift kit for 85

    hello looking for a 12 inch lift ..with all hardware ..just springs with no blocks ..sorry i want to lift my truck the right way not with blocks ..although companies like ripping ppl off by using block ..not into that does any one know a place that carries them or kits for 85 ????
  8. I

    1986 chevy silverado

    here in montana ppl use old conveyor belts from the mills and cut them to fit
  9. I

    Alternator

    anything over 200 amps would get hot and quite working so id stay at atleast 200 amps and u would be fine ..remember the battery is just for starting and storage for power if it needs ..
  10. I

    needing some help ....

    soon my transmission will be in the shop then hopefully then the lift kit .....and 38s or 44 s ...does any one have a clue on what all type of vehicles have buckets and consols in middle that would interchange ..
  11. I

    needing some help ....

    thxs ...89 for the diagram it helped a lot ...........tore all the old crap off and redid all to the diagram and used new wires .. now its actually working like it should .........maybe the old wires where just so dried and so on that one could have been broke or just really shot ....thx
  12. I

    Oil pan gasket??

    new 350 goodwrench motors are in fact able to have the dip stick on iether side but to know for sure check casting numbers or just take pan off... and inspect for your self .beside that u can look to see if it is 2 bolt main or 4 bolt main
  13. I

    needing some help ....

    ok i sent 2 email and pm one says email the other says ,.. wiring
  14. I

    Advice on starter issue

    ok .. in case many ppl havent told you there are 2 type of starter and bolts for checy 350 motors be sure u have the correct ones installed and 2 double check starter housing new ones are not always the same as the old ones ....
  15. I

    needing some help ....

    ive tried and checked with meter on grounding and all positives.. and nothing is showing up .. so i been debating on getting a new regulator for my alternator.. and seeing . if that dont fix my problem ........or maybe pulling my fuse box and cleaning all connections just to be sure all...
See more

Latest posts

Forum statistics

Threads
42,192
Posts
911,103
Members
33,687
Latest member
Dale Downes
Top