Recent content by Huckleberry
-
Oil pressure gauge (electrical)
Thanks Ricko. Appreciate you and the help- Huckleberry
- Post #3
- Forum: Retro-Fit & Aftermarket Accessories
-
Oil pressure gauge (electrical)
Hey ya'll. Do they make a aftermarket oil pressure gauge that plugs (electrical clip) on the OEM sending unit? SBC 350. or....is there any other location to put a mechanical gauge easier than under the distributor/firewall?. The gauge has a short...killing the battery. Have replaced...- Huckleberry
- Thread
- Replies: 2
- Forum: Retro-Fit & Aftermarket Accessories
-
2 stick transfer case
Thanks, this looks like mine. Left stick is all the way forward. Right stick is all the way back.- Huckleberry
- Post #19
- Forum: Transfer Case
-
2 stick transfer case
Help. I bought a 1978 K15. 350ci. Turbo 350 transmission. It has a 2 stick transfer case. The manufacturer tag says the truck is a camper model. Can anyone send me the shift pattern for the 2 stick? No pattern inside the truck. Thanks again for the help.- Huckleberry
- Thread
- Replies: 33
- Forum: Transfer Case
-
Fuel pump
Thanks for everything. No black or dark smoke. Carb is a edelbrock 1406. 1 year old. Did check vacuum and double checked the idle screws. I have not check the fuel pressure. Will do that. Replaced all spark plugs last Saturday. All wires good. Rubber fuel lines going into the pump...- Huckleberry
- Post #14
- Forum: Carb Fuel Systems
-
Fuel pump
Yes, as down....Boggs when gas applied. Not sure if it flooding with gas or starving for gas.... could the carb float be closing? Bad fuel pump? Vapor lock?. Changing the fuel pump as a start.- Huckleberry
- Post #10
- Forum: Carb Fuel Systems
-
-
-
Fuel pump
1978 GMC K15. Stock crate 350ci. Mechanical fuel pump(stock). Does a fuel pump go weak or just quit? Truck sometimes starts hard but not always. Truck runs good, then lays down when throttle applied. (45-50 mph). Sometimes stalls out. Truck will restart. Replaced the distributor...- Huckleberry
- Thread
- Replies: 17
- Forum: Carb Fuel Systems
-
-
Hello, my name is Derek, and I have Just joined this page, trying to find some good information on working on my new 1978 k30
Welcome. Best site ever- Huckleberry
- Post #15
- Forum: Introduction
-
-
-
Fan blade
Thanks, they only now sale electric fan upgrades. I reached out to Summit Racing. I have a 6 blade coming. Appreciate you for the help- Huckleberry
- Post #3
- Forum: Engine & Performance
-
Fan blade
Need advice. Need a part number or vendor info. Need a fan blade ( no clutch) belt driven. 350 ci crate motor. 1978 GMC K 15. 4wd auto transmission. The broken one was a 7 blade 18 3/4. Or recommend a good replacement. Thanks in advance- Huckleberry
- Thread
- Replies: 3
- Forum: Engine & Performance
