Gander's latest activity
-
GI got mine from LMC with a new pod and printed circuit. All works great. I had to cut a bit of the speedo hole with a unibit.
-
GIt's from a medium duty truck. A nice upgrade if it still works, imho.
-
GGander reacted to Masseyman's post in the thread Anyone know how to disassemble this fender antenna? with
Like.
If it were me I'd obtain the CB antenna and see what it comes with etc. It may come with its own cable in which case you can cut the... -
GGander replied to the thread Anyone know how to disassemble this fender antenna?.Yes, the goal is to mount a CB antenna to the bezel. I need to get it apart so I can measure and make absolutely sure that what I order...
-
-
GGander replied to the thread Anyone know how to disassemble this fender antenna?.OK. Just wanted to know before I started turning on things too hard. There’s that large chrome hex and then further up just below the...
-
GGander reacted to bucket's post in the thread Anyone know how to disassemble this fender antenna? with Like.
That big hex nut should be what holds the antenna body to the mounting bezel. It will be a fine thread pitch and might be a bit seized...
-
GI’d like to put this mount to use as a CB antenna but can’t figure out a way to disassemble it. I can see a couple spots on it where I...
-
-
GGander replied to the thread TBI/center bolt valve cover options.One thing I’m wondering about the center-bolt valve covers. The drivers side cover I’ve got doesn’t seem to be threaded for a screw-on...
-
GWell ..... long time ago it seems, I made this post and never closed it. FUN FACT: I know a guy who repaired me Peavey Bass Amp, and I...
-
GGander replied to the thread Wiper Control Module.Hate to resurrect an old thread but thought I’d answer this question with a couple of pics for anyone working on these old pulse wiper...
-
-
GGander replied to the thread Latest thinking on replacement gauges.Double post
-
GGander replied to the thread Latest thinking on replacement gauges.Built this cluster using the stock cluster from my 1987 V10, a factory tach cluster from a 1985 C20, and a couple 88-89 cluster parts...
-
-
GGander replied to the thread Dash pictures of ‘77 K5 Blazet w/tach.Just thought I’d share this link. It’s got a LOT of info on here about the factory tachs in squarebody trucks. Not all this info is...
-
GGander replied to the thread Dash pictures of ‘77 K5 Blazet w/tach.This is who I used for the replacement board on the factory tach I used. Completely satisfied and it’s held up just fine. I WILL say...
-
GThat is great to see there is a replacement board for the original truck tachs! I read the old articles about how make your own...
