fast 99's latest activity
-
fast 99 replied to the thread Can't get rid of bog.Easy to diagnose, install a vacuum gauge to manifold vacuum. Under a load will decrease to almost zero or loosen header pipe, drive... -
Original routing on my ‘75 was with the BAT wire in a plastic loom, clipped to the top of the valve cover, down the back of the engine...
-
fast 99 reacted to Ricko1966's post in the thread Belt squeal (while accelerating)/alternator question with
Like.
You do not need to change the wire.even after the squeal is corrected. Stay on task fix the squeals. Maybe the angle of your pics,but... -
fast 99 replied to the thread Belt squeal (while accelerating)/alternator question.Have to respectfully disagree that belt construction is the issue unless width is incorrect. I have installed almost every brand belt...
-
-
fast 99 replied to the thread Caliper rattles...help?.If the caliper is loose just get new hardware. Never had to go oversize with the wedge and spring. Also the outer pad needs to be...
-
-
fast 99 replied to the thread Belt squeal (while accelerating)/alternator question.Picture of belt and pully arrangement please. Have seen mismatched pully diameters.
-
I feel your pain,and it sucks. Most people don't understand all parts are not the same and getting good parts 1st time around as a...
-
I used the longer bolt method to hold the rod in place. There was a note in the box suggesting to pack the pump with heavy grease to...
-
fast 99 replied to the thread K20 454 truck engine build.Double pumper will hurt millage, not that it will be that good in any case. Take a look at air flow charts for the CI and operating...
-
Don't "over cam" it. You will be happier in the long run with something on the "smaller" side than something real long on duration...
-
fast 99 replied to the thread Trailering your square body.Generally speaking, you want 10% tongue weight. Should be adjusted to keep from getting squirely.
