emoze
Latest activity Postings About
-
-
Id outsource the bushing R/R to a shop...Alternatively there is a dedicated Kent Moore branded bushing service set, J-21465-01 for... -
220 grit. https://www.enginebuildermag.com/2004/05/cylinder-bore-refinishing/
-
emoze reacted to Matt69olds's post in the thread Truck cranks and starts and dies immediately with
Like.
Since you have HEI, the BEST way to wire it is to find the original resistance wire and remove it. Then you can install a regular wire... -
emoze reacted to 75gmck25's post in the thread Truck cranks and starts and dies immediately with Like.
The wiring colors at your starter are not original. - red wires appear correct, but there should be a fusible link in the small red...
-
emoze reacted to legopnuematic's post in the thread Truck cranks and starts and dies immediately with Like.
1973 would have had points, if it has HEI now someone added it, good chance they did not bypass the resistor wire (not exactly the...
-
GMT400 wiper arms dont fit on squares iirc , the size is either different or they retain with a nut The Ford i showed (the blue wiper...
-
I also have one of the Innovate systems on one bank of a small block stroker motor. I am pleased with it but it kills a sensor about...
-
emoze replied to the thread AFR GAUGE addition?.... https://forums.pelicanparts.com/dto_garage.php?do=viewvehicle&vehicle_id=10638
-
emoze replied to the thread AFR GAUGE addition?.i ran a wideband dual sensor setup on my 3.2 porsche; there are some caveats related to early sensor failures $$$ ... best to install...
-
-
Loading…
-
Loading…
