Chris64's latest activity
-
Possibly- It is a dual filament bulb and the side marker (right turn signal) actually grounds by going through the bulb. I'll try to... -
Chris64 replied to the thread Instrument panel light question.ok, now I need to add more detail. It's all incandescent and every bulb has been replaced in the entire car except the front right...
-
Chris64 replied to the thread Instrument panel light question.I did not see an instrument panel ground wire...hmm. It's just a harness and the speedo cable and the oil line. I did see a wire...
-
It is almost certain to be a ground issue. When a ground is bad, devices “find” other paths to ground, and lights go on and off. Did...
-
It is getting back feed from the parking lights (not uncommon)- usually a ground issue. I always start by checking grounds. Check your...
-
I've rebuilt the instrument panel with a new housing and new speedometer. This whole project started with almost no dash lights working...
-
Many vendors do, LMC, NPD Classic industries.
-
Chris64 replied to the thread Instrument Panel housing.I couldn't find it and any of those. You're right - I searched and couldn't find them but they were hiding right in front of my face...
-
My dash cluster is finally looking pretty good, but the white plastic housing is insanely brittle. The left mount tab was already broken...
-
-
Chris64 replied to the thread Keyless entry upgrade.I used to install alarms. GM are a pain compared to most vehicles in that you can't just send a signal to the switch wires. You'll need...
-
-
Chris64 replied to the thread Speedo working but Odometer not working.OK, So I finally took my whole cluster out so I could address my dead right blinker, the light that powers my fiber cables and of course...
-
I just love seeing that 74 olive green. One of my trucks is getting painted that color next time I paint one. I need to polish my...
-
Chris64 replied to the thread Switching to dumbo mirrors.I actually do, but it didn't really line up to anything for me. I ended up just eyeballing it. I think I centered the top with the back...
-
-
Nice work!
-
Chris64 replied to the thread Debugging my AC problems.I have no idea what's in it now. I really haven't touched it in anyway. This is sorta just the next step for me as I try to put my dash...
