CalSgt's latest activity
-
CCalSgt replied to the thread Cab bottom pics needed.Yeah, an epoxy primer topped with a 2K is a great choice. Depending on what color you may be able to find an all-in-one epoxy chassis...
-
CI was just going to post a thread about the bottom of my cab. So a good primer and 2k chassis paint is ideal? I might as well post my...
-
CCalSgt reacted to Ricko1966's post in the thread 350 Engine extreme backfiring please advice with
Haha.
Well I sure won't argue the subject, not now that you have that big green badge under your name -
CCalSgt reacted to Bextreme04's post in the thread No power at some locations in fuse block with Like.
Either one of the fusible links from the starter is blown, you forgot to hook one of the three wires up, or there is a break in the line...
-
CCalSgt replied to the thread No power at some locations in fuse block.There are two red wires on the bullhead in the engine bay that supply different circuits with 12v battery power in the truck. IIRC they...
-
CTry checking continuity across the accessory circuits in the fuse box to see if you have a burned cross over, but I doubt it. I think...
-
CCalSgt replied to the thread Need advice on exhaust..There’s a million ways to skin that cat, here’s my two cents… Manifolds 2.25” (2.5” max) tubing H or X pipe Turbo mufflers Exit behind...
-
CAlso... this is NOT a fuse. I have seen these metal auto resetting circuit breakers go bad in such a way that they will show continuity...
-
CCalSgt replied to the thread NP241 TRANSFER CASE SUPPORT ROD.I guess they only had the bell housing support rods from the motor mounts, I was thinking they had the TC support too
-
CThey also have IFS and a front shaft that doesn't really move much at all. I don't remember any GMT400's having the support rod?
-
CCalSgt replied to the thread 350 Engine extreme backfiring please advice.I’m with @Ricko1966 and @Sad Sack, I’d go back to checking the ignition timing. You could be anywhere from a tooth off to 180 degrees...
-
CCalSgt reacted to Sad Sack's post in the thread 350 Engine extreme backfiring please advice with Like.
As @Ricko1966 said ignition should be checked, using the finger on the spark plug can work for finding TDC but the process can easily...
-
CI'd re drill the hitch and the frame in those middle 2 spots. That way you could get clean perfectly matched holes that aren't sloppy...
-
CThe headers for your vehicle should be manufactured for your stock starter. Unless…things have “changed”. Only thing you may need to...
-
CI'd see if there's any bolt-on replacements for other trucks available at the parts stores (often in the Dorman/Help isle) that have the...
