Recent content by calredneck

  1. calredneck

    Bed bolt upgrade?

    Just don't use an impact gun use a breaker bar and a cheater pipe clean exposed threads and lube no striping of holes for me just swapped 2 beds out not one striped hole a rusty 77
  2. calredneck

    Is there a reliable source for dually fenders?

    Try this don't know nothing about them https://duallyfendersfiberglasstruck.com/chevy25003500duallyfenders/
  3. calredneck

    Marine Engine Questions

    My guess is if it bin mechend for fuel pump those heads are not the good Vortex heads
  4. calredneck

    Hood scoop

    You can get those hoods i have one for a 73 to 80 they make ones for 81 and up but I have not seen one they make them to order last time I found them they were $700 plus shipping it going to look good on my 73 c10 stepside when I get to it
  5. calredneck

    Unknown part 350cui 74 c10

    It is a broken vacuum switch for the smog it missing the plastic vacuum port housing so long as there are no vacuum leaks you should be good
  6. calredneck

    FUEL TANK CAPACITY 1982 K10 4x4

    When you run your tank low see were the gauge reads some of the replacement sending units and maybe gauges don't have the same resistance so they read high by seeing were the gauge is at empty you will find it above E so the scale is off
  7. calredneck

    which bench seat is best? 75? 80? 81?

    73 to 80 the seatbelt goes between the bottom and the back my 84 has seatbelts that come through the bottom seat the two bottom seatbelts are different
  8. calredneck

    Quad Shocks

    The front rear shock
  9. calredneck

    Quad Shocks

    My 84 K20 came with duel front shocks four wheel sold me the lift I wanted to keep the duel shocks they sold me duel shocks it rode ruff I took off the rear shocks and it rides better the problem is there full rate shocks they should be half rate shocks hard to find them and they are expensive
  10. calredneck

    Does anyone make 17" aluminum 4x4 Rally wheels?

    In my opinion I like 10" wide wheels it going to be your choice of after market wheels you could do a steel wheel 10" wide and run beauty rings and dog dish hubcaps no center caps
  11. calredneck

    Does anyone make 17" aluminum 4x4 Rally wheels?

    Nothing stock will look right to narrow it the 8 lug
  12. calredneck

    Changing from 80 square headlight back to 74-78 round headlight question.

    I have a round rad support and valance and other parts would like to trade if close enough I am in northern Calif.
  13. calredneck

    Finished up dual battery installation, working well.

    I have a battery isolater the problem is I have to use jumper cables the way you have hook up your second battery that if a draw happen you wood loose both batteries I have not done it yet but I think a boat battery switch should work off bat 1 both or dat 2 you would still need an isolator to...
  14. calredneck

    Dash Differences?

    The 84 and up C and K 10 1/2 ton gas smog truck have that light the have a ECU and a computer controlled carb the 20 and 30 we're not computer controlled. The bezel I have not found one with the light window post it here if you find one
  15. calredneck

    Need advice

    You can get a flex plate (fly wheel) for the one peace seal cranks that will work with a th350 or th400 from Summit or Jegs if you need a new flex plate
See more

Latest posts

Forum statistics

Threads
48,673
Posts
1,074,302
Members
43,344
Latest member
Original
Top