B
Reaction score
3

Latest activity Postings About

    • B
      bwolff0820 replied to the thread Carburetor rebuild help!.
      Found out where it goes. Order a new assembly from cliffs. Thanks for the help
    • B
      I did my first carb rebuild on the Rochester quadrajet and after installing back on the truck I realized it was flooding instantly. I...
      • AE3A2CA5-B536-42B3-85CF-DF0A2DDA21CE.jpeg
    • B
      bwolff0820 reacted to Ricko1966's post in the thread EGR bleed solenoid with Like Like.
      Look on amazon. Thought I posted this at the start of this thread,I guess I didn't push the save button They have them on Amazon. If...
    • B
      bwolff0820 replied to the thread EGR bleed solenoid.
      I agree. The truck I’m starting to rebuild sat for about 15 years and I’m trying to get everything out back to stock so I can have a...
    • B
      bwolff0820 replied to the thread Carburetor rebuild issues.
      Does anyone recommend a YouTube or any other tutorial to follow while rebuilding? I found one on YouTube but I’m beginning to think they...
    • B
      bwolff0820 replied to the thread Carburetor rebuild issues.
      I checked the float height when reassembling. There were some other screws that said to tighten down and back off “x” amount of turns...
    • B
      bwolff0820 replied to the thread Carburetor rebuild issues.
      I will start with making sure the float is adjusted properly and that the needle is seating like it should and go from there. Thanks for...
    • B
      bwolff0820 replied to the thread Carburetor rebuild issues.
      I did make sure the clip was attached to the right spot on the float. I will have to double check that float hinge is siting higher than...
    • B
      bwolff0820 replied to the thread Carburetor rebuild issues.
      I will give this a try and go from there. Never thought about checking that before I put the carb back on.
    • B
      bwolff0820 replied to the thread EGR bleed solenoid.
      That’s what I was thinking after searching the internet and could find one. I’ll check some local junkyards and se if they have one and...
    • B
      bwolff0820 replied to the thread Carburetor rebuild issues.
      So I went back out last night but forgot to get pictures. It seems like too much fuel is getting into the carb. Looked to me like fuel...
      • 0CA41462-9F13-4B15-84D5-77955F844F6F.jpeg
    • B
      I have a 82 Chevy C10 with the 305. Truck sat for about 15 years. I recently pulled the quad jet and rebuilt. Put it back on today and...
    • B
      bwolff0820 replied to the thread EGR bleed solenoid.
      Does anyone know where you can buy a new one? Currently rebuilding my 82 C10 and staying stock with everything. Any help would be...
  • Loading…
  • Loading…

Latest posts

Forum statistics

Threads
38,034
Posts
816,218
Members
28,289
Latest member
dangerzonetx
Top