the rad is visibly leaking. the plastic tank on the drivers side is coated with the brown residue from the stop leak laced coolant. I haven't checked for coolant in the tranny. I'm assuming I would see signs of that on the dipstick. I don't believe there is oil in the coolant. Ive heard oil...
Thank ya sir. I did read that thread. It was very informative. I'm in denial with the cracked head part. I truly think that is the culprit, but I'm praying its something much simpler and less expensive to fix. I'm seriously considering finding a motor and rebuilding it, then doing a swap. I...
Thanks for chiming in guys. I am using approximately 1.5 quarts of oil a week and probably a gallon of coolant every 1-2 weeks, roughly. I have not done a compression test yet. I have the tools to check cylinder compression and coolant system pressure. I haven't checked coolant pressure because...
Here's the skinny. My 90 suburban 4wd 350 tbi is going through some fluids. It's used oil since I got her but doesn't leak on the ground. I don't notice any blue smoke out the exhaust, so I'm sure it's not burning any(or it's burning very, very little). I did finally notice oil droplets shooting...
Getting the whole front xmember and arms and spindles is the way to go. Should just bolt right in. Your big expense will be wheels and tires. Good luck!
I've got a 90 suburban 1/2 ton 4wd. My body mounts are wasted and the body flexes off the frame. It sits fine on the frame. The mounts stick through the holes on the frame. I'm thinking of doing poly bushings and a 1" body lift from ORD. does anyone have pics of what a mount should look like. I...
We should fire this old thread back up again. I have a connex 4600t I'm going to mount. I don't know what antenna I want, but I hear the long whips are the best. I'm going to roof mount the antenna, but I'm not sure about the radio.