Bennyt's latest activity
-
BBennyt replied to the thread Is there a reliable source for dually fenders?.Short answer is yes. Long answer is: out of stock, production issues, etc There is a company that makes widened ones. I keep a...
-
BBennyt replied to the thread Internally v. Externally Balanced 383 ID.Glad you got your answer. When I was working at PAW in the 90's, the 383 assembly we produced was extremely popular and it seemed like...
-
BIt is a two-piece seal with a larger pattern flange. I called SCAT today - unfortunately, this crank predates them putting the full...
-
BHey everyone, new member and new to square bodies. I've always wanted one or maybe an OBS Ford and I saw this gem, couldn't pass it up...
-
BBennyt reacted to goldpack's post in the thread 1984 Winnebego RV P30 Chassis 454 Th475 and REAR DISK BRAKES. with
Like.
you know if you leave the roof on that,...you could have a "covered bridge", with railings. -
BBennyt reacted to goldpack's post in the thread 1984 Winnebego RV P30 Chassis 454 Th475 and REAR DISK BRAKES. with Like.
yep,...put the hydraulic lock on, AND deploy the wheel chocks. release hydraulic lock,...make sure in neutral (preferably with a safety...
-
BBennyt replied to the thread 1984 Winnebego RV P30 Chassis 454 Th475 and REAR DISK BRAKES..i totally understand. Ive had to unstick a few. I just wouldn't trust a hydraulic parking brake as pressure bleeds off eventually. And...
-
BBennyt replied to the thread Ditching Dual Tanks.I went with Boyd as they were the only ones that would do a centerfill. Everyone else was offset.
-
BBennyt replied to the thread 1984 Winnebego RV P30 Chassis 454 Th475 and REAR DISK BRAKES..The P30 was also available in the 8x6.5 pattern so brakes are available. Frito-Lay trucks were the most common.
-
BBennyt replied to the thread 1984 Winnebego RV P30 Chassis 454 Th475 and REAR DISK BRAKES..Legally, parking brake has to be mechanical. For temporary use, lots of trucks have MICOs which is a lever that holds the hydraulic...
-
BBennyt replied to the thread 17 inch steel wheels- 81 C10 2wd 5/6 static drop..You dont need to spend money on the fitment tool unless you really want to. 2 pieces of wood is all it takes. One mounted to lugs, and...
-
BBennyt replied to the thread 17 inch steel wheels- 81 C10 2wd 5/6 static drop..The selection of 17" tires has shrunk greatly in the last 10 years. If you are buying new wheels, I'd go 18" or 20". And if you ever go...
-
BBennyt replied to the thread Dash speaker mounting.I think i might cut the doors, all four as its a CC, for 5". I plan to use the foam baffles behind. What i cant find is correct looking...
-
BBennyt replied to the thread New bed side recommendations?.If you could post pictures and prices, it would be helpful, however you must have 20-25 meaningful posts before selling/buying in the...
