-
-
BI have used that 1" zero rate spring before and thought it was cheap and easy PLUS! it raised one inch. *(rear only) Hope this helps...
-
BI am sorry I missed this thread when you first posted it. My '87 is on 2" blocks in the rear and 2.5" Skyjacker Soft Ride springs in...
-
BBlazer sits on 33x12.5x15 KO2’s, 15x10 mags, 2.5” lift with ORD rear shackle flip and other parts. It’s close but no rub on the fenders.
-
BI’ve had a 2.5 lift with 33s on my truck for over 20 years with no issues This is an old picture, as it is torn partially apart now...
-
BNew member after purchasing a 1986 K10. Looking for advice on Lift - currently have a 4" superlift springs up front blocks in rear...
-
BI went with a Skyjacker lift and modified it slightly to suit my taste. You can call it a 2 inch lift. I am running the 33x12.50-15...
-
BI have a 1" lift with 31's on K20
-
B2 inch rough country with 31 inch tires. And there’s plenty of room to go bigger.
-
BI went with 2.5” blocks in the rear and the 2.5” skyjacker springs up front. I will be removing the lower spring section (like redfish)...
-
BYep. I’ve got 20x8 and 20x10.5 with a 255/40/20 and 315/35/20. I drive this truck all over the country, never had a problem with the low...
-
B@chevy79_qa I have not replied to this thread yet because my Truck is a 1500 and is running the factory 15 inch rally wheels. But I am...
-
B@10scoops I don't know if you are focused on 35s and want the right lift for that or you want to get a certain look. The Truth that...
-
-
Loading…
-
Loading…
