Recent content by AustinDube

  1. AustinDube

    383 Stroker build

    Thanks for all the advice guys and yeah im going to have to swap my gearing its 3.31 but i only have 31s for tires sadly
  2. AustinDube

    383 Stroker build

    This truck is my restoration project. This was my uncle gerard's old plow truck and he had died 3 months into me having the truck, now its my 2nd year having the truck and its alot farther now. and the original miles are 33,308
  3. AustinDube

    383 Stroker build

    FIRST OFF I WANNA SAY SRRY FOR THE LONG POST, BUT IF U WANNA SKIP TO THE QUESTIONS TO THE BOTTOM I WOULD APPRECIATE IT ILL SEND OLDISH PICS OF MY MOTOR WITH ALL NEW PARTS IF ANYONES INTERESTED IN SEEIN IT, I GOT 4K INVESTED IN THIS TRUCK W MY EARNED MONEY Just looking for some tips n tricks...
  4. AustinDube

    New to forum and driveshaft angle ?

    Hey I have A 8 Inch lift 6" spring and 2" shackle in front and my driveshaft won't reach. Would that dodge driveshaft work for my application with one of those 1" skyjacker spacers? on my 76 k10 np205 and is it only a 2005 dodge 2500 or is it the whole generation
  5. AustinDube

    8 Inch Lift Driveline Help

    So I haven't done the rear yet, but the front 8" of lift i have in the front gives me about an inch and a half to 2 inches of room I need to extend my front driveshaft. I have seen spacers for cheap and I might get one from superlift but it doesn't seem long enough. Transer case drop wont do...
  6. AustinDube

    383 Stroker build

    here is the kit im looking at http://www.ebay.com/itm/352081370211 And it says that the block would have to be decked and bored for the pistons, now yes I want to have it machined .40 over in the cyllinders but Im wondering if I need to deck the block? this engine has been rebuilt before and Im...
  7. AustinDube

    Looking for a new cam

    Im looking for a cam that would deliver the best power to my sbc 350 1st gen w stock heads. Im looking at an edelbrock rolling thunder series roller cam and converting it to a roller engine since im building it to handle more power as it will be a 383 soon. Also debating a edelbrock performer...
  8. AustinDube

    T-56 6 speed swap?????

    Is it possible to hook up a t-56 to a 350? on a 4wd k10 that goes to a np205? wondering if its possible even with new machined bellhousings or anything
  9. AustinDube

    Curious of hp/torque output

    yeah a cam would be nice but im waiting till income tax to pull er out so i can do a rebuild/ stroker build at the same time
  10. AustinDube

    Curious of hp/torque output

    Just wondering how much she can put out
  11. AustinDube

    Curious of hp/torque output

    I have a 350 4 bolt main stock everything exept edelbrock EPS high rise, edelbrock 1405 600cfm manual choke, and a full dual exhaust summit racing headers dual hooker super competition exhaust with 28" thrush glasspacks. Thats all thats done to it for now but its also hooked up to a sm465-np205...
  12. AustinDube

    383 Stroker

    I asked a seller on ebay and he said he can internally balance it for an extra $125 instead of externally. and also mine is a 2 pc rms and a 4 bolt main 350
  13. AustinDube

    383 Stroker

    Im looking on Ebay right now and other places and I cant really find an internally balanced crank Im not sure if they're made but some of them say they're pre-balanced but they're still externally balanced cranks This is the kit I was looking in to...
  14. AustinDube

    Manual Clutch Fan To Automatic Fan Concerns

    Yeah they both sound like good options i'll stick with mine for now and yes it is a fixed fan on there no clutch, and the radiator has a bunch of wacky things done to it and I'll want to replace it and an electric fan would probably clean up my engine bay a little bit
  15. AustinDube

    383 Stroker

    Wondering about getting a stroker kit but my only consern is the balancing. The kit i found is already pre balanced but its externally balanced with a flex plate in the kit, I have a manual flywheel but found this bracket on ebay as a counter weight http://www.ebay.com/itm/191450583552
See more

Latest posts

Forum statistics

Threads
42,116
Posts
909,494
Members
33,611
Latest member
RNFL
Top