AuroraGirl's latest activity
-
AuroraGirl reacted to Turbo4whl's post in the thread Any tricks to getting your SB doors to close easier? with
Like.
Here is the product for door seals, it't called Door Ease It is like a wax, you coat the rubber. Apply it like lip balm. -
When I went to buy factory doors for my '74, they were already out of production. I got the later doors, easy to tell, they have the key...
-
AuroraGirl reacted to ss454elco's post in the thread Stock Cold air intake performance upgrades with Like.
I added another snorkel removing the flappers inside. I retained the actuators for a stock look. I also removed all but the outside...
-
AuroraGirl replied to the thread Any tricks to getting your SB doors to close easier?.was it the weather strip flange/new weather strip then? as long as your door lines up at the moment, keep an eye on it a couple months...
-
AuroraGirl reacted to Edelbrock's post in the thread Any tricks to getting your SB doors to close easier? with Like.
I hated the way my doors closed. As others have said, hours of adjustments with no luck - verses a few minutes posting the issue here...
-
AuroraGirl reacted to Captain Ron's post in the thread Any tricks to getting your SB doors to close easier? with Like.
For what it's worth I cut a slit down the middle of the Pex to make it simple to install. Just pry it open a little and slip it over...
-
AuroraGirl replied to the thread Can anyone tell me what this is??.i bet you have cooties too sicko
-
Not on a 1974 c10 would it be acceptable to wire a whole 2nd fuse box to one fuse in the original fuse box. It was the next post after...
-
AuroraGirl reacted to Matt69olds's post in the thread TH400 Slipping When Warm - Chunks in Oil Pan with Like.
Hopefully you have read Nicks th400 thread. Throw away the spring, replace the broken plastic piston with the older aluminum. Be sure...
-
AuroraGirl reacted to 82sierradude's post in the thread TH400 Slipping When Warm - Chunks in Oil Pan with Like.
I finally got around to disassembling the TH400 because the truck stopped shifting out of first gear and has been sitting for months...
-
AuroraGirl replied to the thread Can anyone tell me what this is??.the only time this might be safe would be an unused but internally present maxifuse position of sufficient size in fuse boxes (startin...
-
You know, you might have still had some kind of credibility here before you just made that elaborate post. But any credibility you might...
-
AuroraGirl replied to the thread Can anyone tell me what this is??.No... no im not letting you get off that easy I was advocating civility and wanted to hear what you had to say, because genuine interest...
-
Mine is an '05 and has the updates, but I haven't run it enough to know how much oil it does or doesn't consume. Far as I know, folks...
-
AuroraGirl replied to the thread Any tricks to getting your SB doors to close easier?.is your door appear aligned with the cab depth wise? if so you can move the striker out if you dont mind the sticking out a bit until it...
