AuroraGirl's latest activity
-
It's not a permanent problem, but thanks for the info to alter my setup if I need to. -
It is confusing because the warning sounds scary. I can see a guy reading that on a Monday and not realizing what's implied and getting...
-
AuroraGirl reacted to legopnuematic's post in the thread 3 or 4 cylinder engine with a 8 or 6 cylinder Dwell meter. with
Like.
Double the reading for half the cylinders. 8cyl x2 = 4cyl -
AuroraGirl replied to the thread 3 or 4 cylinder engine with a 8 or 6 cylinder Dwell meter..same situation for waste spark engines iirc unless one is somehow only triggering off higher energy sparks (wasted spark on the exhuast...
-
AuroraGirl replied to the thread Ignition problems.if the issue were to persist with turning force, decoupling the starter engagement from the key switch is a minor anti-theft thing one...
-
Yeah there were differences in the earlier years, depending on which hub was used. By '77, the spindles and bearings were the same for...
-
I thought some of the old Citations had the cross split systems
-
Won't matter a great deal cause whatever cooler I come up with will need homespun brackets to be made up .. Got all kinds of room...
-
Thank you for your fast and explicit direction. I will examine the truck and report back. It is away for the week but I will get it...
-
O.P. had his brake lines reversed at the master. So bias was totally wrong.
-
Never push a brake pedal to the floor. If the master is contaminated - it can pack crap in the forward piston seal and ruin it...
-
AuroraGirl replied to the thread 81 K10 fuse panel layout.DO NOT USE OIL PRESSURE GAUGE FOR FUEL PRESSURE. You need a fuel pressure gauge! Also, crawl under the truck and look at the pipes...
-
AuroraGirl replied to the thread GMC-IH.i would simply go based on the ease of mounting in your situation, what fits better
-
AuroraGirl reacted to KSSB's post in the thread Fix Slamming Doors - Striker Door Latch Repair with Like.
Ok, my first post. I'm going to do a proper introduction post when I get a couple pictures taken. Anyways, my 80 Custom Deluxe, got...
-
I'll leave it where it's at ... Do think for the most actual oil temp would be having the gauge installed near the bottom of the oil pan...
