AuroraGirl's latest activity
-
AuroraGirl reacted to HotWheelsBurban's post in the thread 1977 C20 Heavy duty with 11.15 drums? with
Like.
I can vouch that on my OBS one ton with 13" brakes on a 14B FF and 16" factory steelies, the space is a bit tight....as in the upper... -
AuroraGirl reacted to klunker797's post in the thread 1977 C20 Heavy duty with 11.15 drums? with Like.
Thanks everyone. Very helpful, that’s why I love this group!
-
AuroraGirl replied to the thread Do I restore my AC or?.gm says r12 to r134a you do 90% of the r12 fill, then subtract .25lb from the result You would want to of course have all the r134a...
-
-
AuroraGirl replied to the thread 1977 C20 Heavy duty with 11.15 drums?.Heres some more differences in the 1973-1987 or so 14 bolt FF brakes (11 to 13) I have no idea what the slip on era (88-01?) look like...
-
-
Yep, it's a very obvious size difference between the two of them. Anybody that has seen both drum sizes can tell by looking at them. And...
-
AuroraGirl replied to the thread 1977 C20 Heavy duty with 11.15 drums?.no you dont, if you have a 14 bolt you simply need to look at the back of the wheel where the drum is. the 11 inch drum will have lots...
-
-
AuroraGirl reacted to dusterdude's post in the thread Who sells the best replacement gas tank with Like.
I like that,thanks
-
AuroraGirl replied to the thread Power brake booster recommendations?.dual chamber boosters have more oomf than single, as well
-
AuroraGirl reacted to Ricko1966's post in the thread Power brake booster recommendations? with Like.
For your info, if you switch to power brakes you will need to relocate the position of the brake pushrod. If your pedal does not have...
-
AuroraGirl replied to the thread Who sells the best replacement gas tank.
-
-
AuroraGirl replied to the thread Who sells the best replacement gas tank.just fold it Trimming is a lot of work
-
Cast aluminum. If it was stamped steel, I would have just modified it. The thought had crossed my mind to modify the aluminum pan, but...
-
AuroraGirl replied to the thread Vortec 8100/8.1L Oil Pan.That’s good. Kinda like the 3800 then
-
It's not structural to the block in any way, in this case at least. Just like the aluminum valve covers aren't structural. They are just...
-
I went through this today on a modine egr / coolant cooler assembly today, was “told” not the weld a washer and then a nut to a broken...
