ali_c20's latest activity
-
It wasn't a dumb idea,and most of the cars went thier whole life without a failure,the transmissions gave up,the bodies rusted away,and... -
ali_c20 replied to the thread Rust coating for fill neck.Get a new filler neck, no worries about prep, paint and less work.
-
probably wasnt prepared right or something was caught between it What chemicals were on the surface?
-
Yes, to use your existing trans & adapter you definitely need to stay with the same spline count.
-
Just make sure you are buying a used NP203 configured for a squarebody GM truck and with your same transmission. All three major...
-
i would, simply because if its an np203 i think they are all compatible iirc, except for rare rare setups in the 70s , but gm and ford...
-
Redneck engineering. Gotta love it. Please do not entertain a body lift.
-
You aren't supposed to start adjusting the box with the sector lash adjuster. You are supposed to set the worm gear thrust from the...
-
Even with rough riding springs and those big wheels that really aren't even that big, it should be capable of steering down the road...
-
Check the frame area at the steering box bolt holes for cracks.
-
Are you sure the frame isn’t flexing due to cracks?
-
Backstory.... Having just gotten the wife's Burb back on the road after it's Winter refresh, I drove it to work last week...... and...
-
ali_c20 replied to the thread Another fng to here.Welcome from Austria. Post pics!
-
I need to address the leaky elephant in the room. Luckily the only place my truck leaking (making it to the ground anyway) is the...
-
I would take it apart and reseal it. The speedo adapter has a little seal in it. The output seal is most likely leaking due to a grove...
