ali_c20's latest activity
-
ali_c20 replied to the thread Carb Adapter.The bore of the stock manifold is 1.375 and the AVS2 has 1.44 but of the bore positions don't match. On the stock manifold with 4 holes... -
-
ali_c20 replied to the thread Carb Adapter.The bore of the stock manifold is 1.375 and the AVS2 has 1.44 but of the bore positions don't match. On the stock manifold with 4 holes...
-
Nice looking blazer btw!
-
ali_c20 replied to the thread New Dual Tank Install....I have a question...?????.With new tanks and socks there is no need for a filter imo. I think they put that sticker on to avoid warranty claims when people change...
-
Thank you Turbo4whl. Just when I thought I was fairly familiar with these trucks, I get schooled.
-
The left picture is a pressure switch for the electric choke (2 terminals). The larger one, on the right, is the pressure sender for the...
-
Just a notice, I edited my original post because I do not want newer members to feel unwelcome or like they are not part of the...
-
ali_c20 replied to the thread K5 almost killed me brakes to the floor.If that would have happened to me I would check every single part of the brake system and replace everything that looks not 100% ok. I...
-
ali_c20 reacted to Ricko1966's post in the thread K5 almost killed me brakes to the floor with
Like.
Stick your head under the dash and .ake sure there is a pushrod pinned to the pedal and going into the booster. Only reason I said... -
Up date: After futher diagnosing I replaced the ignition module. All ignition module that I have replaced all died and would not...
-
ali_c20 replied to the thread Accelerator Cable Adjustment.Post some pics. Is it the right cable? Was it on the truck when you got it? Are the brackets the right ones? Which carb? You can get a...
-
How about some pictures of what you’re working on? What carb/intake, are you using? It might be quicker and easier to just buy the...
-
ali_c20 replied to the thread Missing control arm bumper?.My guess is rotted away. The part that goes into the slot is not very thick, becomes brittle and brakes. Good bye bumper.
-
ali_c20 replied to the thread Carb Adapter.Nope, bought the tuning kit with springs, needles and jets. First put in the springs matching the engine vacuum and from that jet and...
-
I totally missed the 1906 part just saw Edelbrock and adapter and stated my opinion Good catch by @ali_c20 1906 will bolt to spreadbore...
