83Stepper's latest activity
-
I am suggesting a toggle switch for the win -
Except that doesn’t work for the OP as stated.
-
83Stepper replied to the thread Reverse light options.Would love to have that option, but state inspector says that's a no-no . Lights must be able to turn on/off when going in to and out of...
-
I'm out, because I used a toggle switch. The thing I liked about the toggle is I could flip the lights on for doing stuff around back...
-
83Stepper replied to the thread Reverse light options.Old school Daytona shifter like below. Saw the Holley switch as an option, but with the way the shifter mounts to the trans, the bracket...
-
-
I've been doing some research but nobody has really discussed this here, so here it goes... My 83 stepside was originally a 4.1 and a 3...
-
83Stepper replied to the thread Vent Window rubber replacement or replace?.They're a total pita to rebuild. If you can locally source a set in better shape, do that. Then if you feel confident in rebuilding...
-
83Stepper reacted to 1985C20FLATBED's post in the thread 1985 C20: Power to cab, will not start when key is in "on" position with
Like.
Thank you all very much for the help! I installed a new neutral safety switch and ignition switch just to be safe. I now have power to... -
83Stepper replied to the thread 1985 C20: Power to cab, will not start when key is in "on" position.Could be a lot of different things. Neutral Safety Switch, Ignition switch, bad ground, bad starter etc. Start with making sure the...
-
83Stepper replied to the thread Master cylinder ID help needed.Greatly appreciated! Did some digging and found some info but nothing like this. Appreciate you and the info!
-
For 1983 the base manual system is JB1 and the master cylinder is part number 18006064 broadcast code CU. Built in Oshawa makes no...
-
83Stepper replied to the thread 1986 Automatic Transmission Leak.Transmission fluid, like a lot of the other fluids in these old girls, have a tendency to migrate and make you think it's coming from...
-
So a little back info on what I've got. 83 Stepside that was originally a 4.1 I6 3 on the tree. PO swapped the 4.1 for a mild build 350...
-
-
Thanks buddy!
-
83Stepper replied to the thread Brake Booster Adjustment.Yes there is. You'll need to remove the master cylinder from the brake booster and use a tool that'll set the depth on one side, and the...
