-
-
I installed these a while back along with new spring bushings, and all new ball joints etc. I added the cover for its look. The stock... -
Sounds like wives tales. If that little extra displacement causes brake issues.. Once bled and equalized, there should be barely any...
-
ButchM replied to the thread Missing sway bar bolts. Anyone know what size they are?.No Prob Hope it helps.
-
ButchM reacted to Edelbrock's post in the thread Missing sway bar bolts. Anyone know what size they are? with
Like.
Very cool. Thanks man. Much appreciated. -
ButchM replied to the thread Missing sway bar bolts. Anyone know what size they are?.Grumba Just did some digging (see below, part no 29), all the 4WD use the same bolt. Its 3/4-10 x 3 1/4". The OEM part number is 328130...
-
-
ButchM replied to the thread Missing sway bar bolts. Anyone know what size they are?.Grumba, you asking for the 77 K5 Blazer?
-
My best guess would be wrong torque when it was put in at some point. Too much torque cracked the prong and the bolt backed out with...
-
ButchM reacted to HotRodPC's post in the thread Idle Mixture Screws Do Not Adjust Anything on 1974 454. with Like.
OK, lots to read here and I didn't read it all so.... I might have missed if someone already made the suggestion. So have you used carb...
-
ButchM reacted to Matt69olds's post in the thread Idle Mixture Screws Do Not Adjust Anything on 1974 454. with Like.
Fix the obvious things first, starting with the vacuum advance. While the distributor cap is off, make SURE the distributor weights...
-
ButchM reacted to 1STLS1's post in the thread Idle Mixture Screws Do Not Adjust Anything on 1974 454. with Like.
I would verify the distributor is installed correctly by bringing #1 up to TDC and seeing where the rotor is at. Then verify correct...
-
Thanks, Butch, that's very helpful! I sent photos of everything I have to Joe Neel at Old Air Products in Fort Worth, and he said it...
-
ButchM replied to the thread Definitive interchangeable parts thread 73-87(91) (non-drivetrain).Virgil Wasn't baggin on the 208s. Had one in an 84 K10 and never had a lick of problem, they're a good box. Just answering the "what is...
-
ButchM replied to the thread Definitive interchangeable parts thread 73-87(91) (non-drivetrain).Probably had to do with the involvement of gov'ment procurement yayhoos that wouldn't know a truck if it ran them over.
-
ButchM replied to the thread Definitive interchangeable parts thread 73-87(91) (non-drivetrain).My point was that the all gear NP205s are generally considered to be stronger/better that the chain driven NP208s. Nothing more. Butch
-
ButchM replied to the thread New to the forum, but not to Squarebodies....Tim Just came across this post. Attached are the diagram for your A/C system and the parts list from a 1985 parts manual. C60 is your...
-
-
-
Loading…
-
Loading…
