P
Poodlehead
Latest activity Postings About
-
-
PPoodlehead reacted to Edelbrock's post in the thread Here’s the best heavy rust dissolver for smaller parts like nuts and bolts that you’re probably not aware of and is probably in your kitchen. with
Like.
I agree, Vinegar is a great cleaner. From my understanding, many good cleaners are acidic. The only thing I have found that works better... -
PPoodlehead replied to the thread 77 C10 HVAC vacuum line replacement through firewall.The vac routing diagram I attached earlier was for a C60 model. Here is the correct one for the C-K10 models.
-
-
PPoodlehead replied to the thread 77 C10 HVAC vacuum line replacement through firewall.A friend had some and the 1/16" is the size in my engine compartment. I've removed some ducts and can feel where it goes through the...
-
PPoodlehead replied to the thread 77 C10 HVAC vacuum line replacement through firewall.I forgot to add a vac diagram. It looks like the single line goes to the head unit, so hopefully that will help
-
-
PPoodlehead replied to the thread 77 C10 HVAC vacuum line replacement through firewall.I have my line 'fixed' for the time being, but it is very brittle. I took another look behind the globe box and it's not as easy as...
-
PPoodlehead reacted to 75gmck25's post in the thread 77 C10 HVAC vacuum line replacement through firewall with Like.
The line through the firewall is GM hard plastic vacuum line, and it’s just pushed through a rubber grommet. If you take the glove...
-
PHow bad are the floors? Flintstone type or just a little crusty? As it sits can it be driven? Heat and AC? Those are the things most...
-
PPoodlehead replied to the thread 77 C10 HVAC vacuum line replacement through firewall.Great idea! Mine is broken in the engine compartment so I will just do the repair/replacement there and be done with it, thanks! I...
-
PMy vacuum line from the reservoir tank in the right rear corner of the engine compartment through the firewall needs to be replaced...
-
PThis is the picture of my ‘75. The larger vacuum line coming out of the bottom of the reservoir/ball runs over to a manifold vacuum...
-
PI've also got 6x9s low in my doors, with tapered spacer rings to point them up a little. https://www.amazon.com/dp/B0007TJDI4/
-
PPoodlehead replied to the thread 6 x 9 speaker mounting in door.I forgot about my ~3' long tapered plastic shelf behind the seat so there is no room for laying down speakers. I just ordered these...
-
-
PPoodlehead reacted to WFarm's post in the thread Any tricks to getting your SB doors to close easier? with Like.
My drivers door has always been a PITA to close all the way. I hate slamming doors or anything else for that matter, but that’s what it...
-
PI think the OP is bored and was attempting to make fun of a large part of the community. This was not their first attemp at using humor...
-
Loading…
-
Loading…
