-
-
59840Surfer replied to the thread Can anyone tell me what this is??.Brake System Design and Proportioning Valve Behavior: The proportioning valve’s role in dual master cylinder systems (introduced in the... -
59840Surfer replied to the thread Can anyone tell me what this is??.C'mon, Butch --- you didn't say that did you? --- because it's not the same system. Surge brakes are self-contained ON the trailer...
-
59840Surfer replied to the thread Can anyone tell me what this is??.It was not uncommon to have that hydraulic-over-electrical controller, drip on your leg or shoes; they were however, the only thing...
-
59840Surfer replied to the thread rear tailgate power window motor Blazer/suburban.Not just a few times I considered going the other way - electric to manual. One thing I do is use some long-set epoxy to lock the...
-
59840Surfer reacted to Zelph's post in the thread rear tailgate power window motor Blazer/suburban with
Like.
Maybe he doesn’t have a motor. Could be doing a manual to power conversion... -
59840Surfer replied to the thread rear tailgate power window motor Blazer/suburban.You can buy them bigger and sand/file them smaller - wear gloves and wear a dust mask!
-
59840Surfer reacted to bucket's post in the thread rear tailgate power window motor Blazer/suburban with Like.
Iirc, my local Ace Hardware sells a few different sizes of brushes.
-
59840Surfer replied to the thread Can anyone tell me what this is??.Hmmmmm .... a label I would wear proudly. Rules are good --- that way you know where you stand and how that vehicle coming at you at 60...
-
Hahahaha your posts remind me of a conversation yesterday. Some friends brother in law was in town for a family deal this weekend. The...
-
59840Surfer replied to the thread Can anyone tell me what this is??.Tell me how this is even taught in "Hydraulics 1A" and let me know if YOU know how it works ... OK? It uses brake fluid in a...
-
-
59840Surfer replied to the thread Rear Brakes Locking Up.I know I inspected a bunch of them and to tell you the truth --- I do not remember seeing cross-fed brakes on any domestic vehicle...
-
If you had both boxes apart and reassembled,you set both of those clearances on assembly,the endplay gets set by how tight the end...
-
59840Surfer replied to the thread Steering does not self center.."In the air" and "on the ground" resistance from the ball joints is a bad call - there are dynamics involved --- eg, the vehicle weight...
-
Not enough caster or super stiff balljoints
-
59840Surfer replied to the thread Rear Brakes Locking Up.Never push a brake pedal to the floor. If the master is contaminated - it can pack crap in the forward piston seal and ruin it...
-
-
Loading…
-
Loading…
