Grit dog
Latest activity Postings About
-
-
Grit dog replied to the thread Opinions on best newish Suburban or Tahoe.3 words. Car Wash Brush Screw that hand washing especially the part you can’t see. I ain’t got the time to use 3 buckets and 2 kinds... -
Bucket, I have retrieved the tire. Are you going to be on the Hot Rod Power Tour or anywhere close to the route?
-
Grit dog replied to the thread Brake Fluid Flush GMT800.^What he said. I’ve become a big fan of the lazy man’s fluid flush on brakes and power steering. And sometimes differentials if no...
-
If the excessive travel developed with a full master here are a few possibilities. Am sure there are others. Rear shoes out of...
-
Hi all just coming over and joining up. I was told to come over here by gxpweasel on gmt400 . I have an 84 c10 , it was my dad’s (pops)...
-
Grit dog replied to the thread 86 C20 - Climate control not changing position - cable or vacuum operated?.Yup. That goes to one of the vac ports on the hvac box. If you take off the glove box door and remove the glove box most of them are...
-
Grit dog reacted to Snoots's post in the thread 86 C20 - Climate control not changing position - cable or vacuum operated? with
Like.
You found your problem! -
Grit dog reacted to Broken85's post in the thread 86 C20 - Climate control not changing position - cable or vacuum operated? with Like.
That is the vacuum line that is most definetly not connected to the vacuum pot it is supposed to and likely your trouble. If it was...
-
Grit dog reacted to Snoots's post in the thread 86 C20 - Climate control not changing position - cable or vacuum operated? with Like.
It may be that one of the vacuum pots has gone bad because you said the rod moved easily. I hope this diagram helps.
-
This is what I was telling you how to make out of 2 bolts and a coupling nut...
-
Grit dog replied to the thread Gas spilling when filling up.@texdave It’s gotta be one to the fuel pump, one return, one vent.
-
Grit dog replied to the thread Gas spilling when filling up.There should be evidence of staining from the gas leaking each time. Although really hard to pinpoint while filling up. Or see up in...
-
Grit dog replied to the thread Front spring question.Fine thread is better than coarse as well but moreso in durability if using the tool repeatedly under a load.
-
This, i have an old piece of shaft that I got from the scrap barrel at work. Drilled it to fit some M12 bolts (that's what we had in...
-
Or a fat passenger. Everybody leaves that one out.
-
-
Loading…
-
Loading…
