1lejohn's latest activity
-
I believe that it is best to replace u-bolts simply because of the stresses they can see upon removal if they have been installed for a... -
1lejohn replied to the thread Accel HEI Super Coil (140003) Magic or Trash.I had a fairly new Accel dizzy fail. I think it was the pick up. I replaced it with a FAST brand. It's been good for 2 years.
-
1lejohn reacted to Nardulli's post in the thread Accel HEI Super Coil (140003) Magic or Trash with
Like.
Well, I have the Accel unit. It is cheaply made, and I was having all manner of issues. I pulled it and replaced it with a GM OE unit... -
Also, I would drive the truck a bit to get some movement into the suspension. That will settle the bushes ( and any internal bind )...
-
1lejohn replied to the thread 5.7 Vortec and TBI.I'm running a Jeg's intake on my truck. It's a decent piece. I'm sure the prices have gone up. It would still be cheaper then an Edelbrock.
-
1lejohn reacted to CoggedBelt75's post in the thread What have you done to your square lately?? with Like.
Added an extra fuse block to clean up some of the added-on accessory wires that were connected to the original block.
-
I daily a 5 inch lift on 35's. Real daily. I wasn't saying don't do it, I was saying it was the worst choice for big lift and mostly...
-
build your dream and who cares if you only street drive it. just look at slammed trucks that can't make it over a speedbump without...
-
Well I feel dumb. The vent hose had in fact kinked behind the fill tube. Instead of paying $25 for the correct hose I just added a brass...
-
Your problem has nothing to do with the vent. The saddle tanks are notorious for having the fill tube almost horizontal, which makes it...
-
Are you SURE the float level is correct? It needs to be just below the sight glass window, if you shake the truck fuel should just...
Latest posts
-
-
-
-
4l80e conversion in 1985 suburban. What parts do I need?
- Latest: RanchWelder
