Recent content by 1984c10

  1. 1

    replaced heads/intake wont start

    This is the slowest forum of any kind i've been apart of. squarebody.com is so much better. i'm out of here. thx to the people that actually helped
  2. 1

    replaced heads/intake wont start

    Im looking to get a new distributor now and all of the ones I find have one single plug coming out that connects to the cap. The one I have now has the same and an additional plug that plugs into the firewall. Do I need to get an exact replacement? Would the distributors with only the single...
  3. 1

    replaced heads/intake wont start

    nobody?
  4. 1

    replaced heads/intake wont start

    So I charged the battery and i'm getting the same weak orange spark. I'm just going to get a new distributor since this one looks old anyway. I'm starting to think that I might have the wrong balancer on this truck or maybe the rubber spun. After watching several other videos of people setting...
  5. 1

    replaced heads/intake wont start

    Thank you. Im charging the battery on wednesday and will recheck the spark and then go from there
  6. 1

    replaced heads/intake wont start

    How can I tell if im 180 out? Im cranking it by hand and watch the #1 exhaust valve open and close and then the intake valve open and close and keep turning until im on 0. Then drop the distributor so the rotor is on the #1. Both #1 valves are closed at this time Is this not correct?
  7. 1

    Vortec head swap?

    I got them off craigslist. The guy had a few pairs. http://www.summitracing.com/parts/sum-226018 Dont have the other links right now. Ill try and post them later
  8. 1

    replaced heads/intake wont start

    I didnt find this to be true. I first adjusted them with the intake off and they were maybe half way compressed. Wont be able to get back to it until Wednesday. I'll charge my battery and see what happens
  9. 1

    replaced heads/intake wont start

    Thank you. This is very helpful. Im going to save this
  10. 1

    replaced heads/intake wont start

    Im going to charge my battery tmrw and check the spark again. I dont think there is 10.5v its pretty low from trying to start it for the past week
  11. 1

    replaced heads/intake wont start

    Is there anyway to verify its bad? I dont really want to just throw parts at it. It seemed to work fine before the swap
  12. 1

    replaced heads/intake wont start

    So it has spark. The plugs smell like gas so I think theyre getting gas. When I turn the engine I feel compression from the spark plug holes so im lost on why it wont start
  13. 1

    replaced heads/intake wont start

    What I did was loosen all rockers and adjusted all over again as I did before. The intake is on and im trying to avoid having to take it off and get another gasket.
  14. 1

    replaced heads/intake wont start

    Checked spark with plug to frame while cranking and it has a light orange spark. Thinking battery really low from trying to start. Now I definitely dont know why it wont start.
  15. 1

    replaced heads/intake wont start

    not sure why thats quite a jump. why else would the rocker get so loose when the pushrod is straight? all of the other valves are fine. maybe a bad lifter? I will verify spark but dont see how it matters at this point when I know there is a problem with the #8 and wouldnt run it like this anyway
See more

Latest posts

Forum statistics

Threads
42,298
Posts
913,278
Members
33,797
Latest member
70meyers
Top