Memaloose
Latest activity Postings About
-
-
Memaloose reacted to legopnuematic's post in the thread Think I found a somewhat rare truck with
Like.
If it’s a C10, a 454 was an option, not available for a K10 -
As far as I know Dex 6 is just a higher quality synthetic version and can be interchanged with dex 1,2 or 3. Usually don't use it as a...
-
Hello, I have an 82' C20 that has the TH400 3-speed auto. I added a quart of Dexron 4 and after, I realized my truck needs Dexron 2...
-
Memaloose replied to the thread Transmission Fluid Question.You can always go up in number with the Dexron without any problem, you're good to go with what you did.
-
Memaloose replied to the thread broken spark plug.You can also use a magnet to collect the metal.
-
Whenever I do this, I put affected cylinder at TDC, compressed air in exhaust pipe and shavings, hopefully, blow out as drilling...
-
First, don't heat with the extractor already in. Extractors are hardened and melt at a lower temperature. Since you have the...
-
The metal shavings from drilling will not be an issue. Use the Ridgid style screw extractors. Drill the correct size hole. Heat the...
-
Hello, changing plugs in my 1987 V20, and 2 of them broke off with little effort. Metal was quite rusty. One came out very easily with...
-
Above suggestions are all on point. Might add need to start with basics, fuel pressure and volume plus basic ignition checks. If that...
-
Secondaries rely on air flow and vacuum changes to open up, so you are not even close to the point where they take effect. You checked...
-
You could use stepside latch pins. Just one side would deter most people...
-
Memaloose replied to the thread 1979 C10 46 Years Young - One Owner.Welcome from NW AZ!
-
Another '79! Far out man. Greetings from the lower Columbia River, looking forward to stories and photos from your part of the world...
-
Welcome! My wife and I just bought a 1979 C10 Scottsdale ourselves and are having fun with it already. Looking forward to see yours and...
-
-
Loading…
-
Loading…
