Ronno6
Latest activity Postings About
-
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.I ordered a 2nd. gen Camaro wheel. I'll see how that goes. If not enough space I will pursue collapsing the column an inch or 2...... -
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.Now......... It has been probably 4 years since I replaced the firewall pad inside the cab. Due to the passage of time and the partaking...
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.I wish it was that simple.. IIRC the column has nuts welded on it to which the bracket is bolted. I can have 2 tabs machined to replace...
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.I could probably fab an adapter bracket that would bolt to the dash, then have the column bracket bolt to it in the relocated position...
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.Interesting.......... Does your truck have dual tanks?
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.For reference, the bottom of the SW is 22" from the center of the seat on my '97 F150. The C10 measures 14-1/2" with the seat all the...
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.Got a link? Thanks........
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.Great ideas and leads, y'all! Keep 'em comin'!! Thanks........
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.Nope...it is original. Gonna have it reupholstered. Maybe they can do something to help the situation......
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.AOOOOOOGGAAAAAAAAAAAA !!
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.Do those require hub adapters or do they bolt right on??
-
Ronno6 replied to the thread Steering Wheel Too Close '84 C-10.I s'pose I am.....6'4" and currently 265...but it was close even when I was thinner...
-
I find the steering wheel in my '84 C-10 to be uncomfortably close to my chest, even with the seat all the way back. I can't imagine how...
-
I have installed a Fitech EFI setup on my 355 in my '84 C-10. Has anyone set one of these up?? I an looking to know what cam setting...
-
Ronno6 replied to the thread Leaking Metal Fuel Line??.Tubing being delivered today. Removing/repositioning the clip under the MM mounting plate is about the only way to move the fuel lines...
-
-
Loading…
-
Loading…
