My brand new pre-owned Chevy

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

geolee

Full Access Member
Joined
Mar 5, 2018
Posts
67
Reaction score
65
Location
jacksonville, illinois
First Name
george
Truck Year
84
Truck Model
c10
Engine Size
350
Just got a 94 short bed standard cab Chevy after I got done with the 84 c10. I did a little preventative maintenance and ended up getting bad parts from oriellys. Spent over a week trying to figure it out. After I got it driving home the check engine light came on so next day I hooked it up to a scanner at work and it said egr problems so I got a new egr then did plugs wires, ignition module, idle air control valve, coil, throttle position sensor and after that it would turn over and not start. Figured maybe got a bad ignition module so I got a new distributor and still same thing. So then after double checking everything I put the old throttle position sensor and idle air control valve back on and fired right up. Just thought I would pass the info on maybe to help someone out later. Today I got a new iac and tps from Chevy and it runs perfect. Lots of brand new junk parts out there these days

You must be registered for see images attach


You must be registered for see images attach
 

The88

Mhmm
Joined
Dec 9, 2015
Posts
1,074
Reaction score
1,363
Location
South Louisiana
First Name
ThatGuy
Truck Year
88
Truck Model
K5
Engine Size
5.7
94 looks like it could squat down a bit but clean. Body lines look straight as well. Also that 84 is a looker!
 

geolee

Full Access Member
Joined
Mar 5, 2018
Posts
67
Reaction score
65
Location
jacksonville, illinois
First Name
george
Truck Year
84
Truck Model
c10
Engine Size
350
94 looks like it could squat down a bit but clean. Body lines look straight as well. Also that 84 is a looker!
Thanks man! I already been thinking about what all I want to do. There's a app I got you can lower ur trucks lol

You must be registered for see images attach
 

1973c10

Full Access Member
Joined
Sep 25, 2015
Posts
6,376
Reaction score
24,013
Location
Oregon
First Name
Don
Truck Year
1973
Truck Model
C10
Engine Size
454
Sweet ride
 

Scott91370

Full Access Member
Joined
Apr 2, 2018
Posts
927
Reaction score
902
Location
Burleson, Tx
First Name
Scott
Truck Year
1985
Truck Model
Sierra1500
Engine Size
350
Nice choice! I don't think it's going to far in your lowered pic though... I've never seen a flat tire flat on the top!!! LOL!!
 

FireTruck1984

Full Access Member
Joined
Jan 7, 2019
Posts
2,826
Reaction score
9,109
Location
Michigan
First Name
Ted
Truck Year
1984 and 1984
Truck Model
High Sierra K1500 350. Sierra Classic C1500 305.
Engine Size
350, 305
Thanks man! I already been thinking about what all I want to do. There's a app I got you can lower ur trucks lol

You must be registered for see images attach
Yeah looks good, but don’t lower it, just level it
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
5,941
Reaction score
9,817
Location
Washington
First Name
Todd
Truck Year
1986
Truck Model
K20
Engine Size
454
Nice rides!
Shows some real pride in ownership.
And valid warning.
It’s not just the Big box Parts stores either. Have had similar struggles with Napa as well.
If it’s a part for a newer vehicle or something I intend to last a long time, I generally make every attempt to buy OEM parts in recent years as the lack of headaches out weighs the additional parts cost. Most recent was 3 bad rebuilt alternators from Napa. 1 lasted a few months and actually died 200mi from home within a few miles of the original parking lot replacement. 2 more bad straight outta the box before I ever left the store.
 

geolee

Full Access Member
Joined
Mar 5, 2018
Posts
67
Reaction score
65
Location
jacksonville, illinois
First Name
george
Truck Year
84
Truck Model
c10
Engine Size
350
Nice choice! I don't think it's going to far in your lowered pic though... I've never seen a flat tire flat on the top!!! LOL!!
Haha I always do that with everything i own just to see what it would look like. Suspension master is the app
 

geolee

Full Access Member
Joined
Mar 5, 2018
Posts
67
Reaction score
65
Location
jacksonville, illinois
First Name
george
Truck Year
84
Truck Model
c10
Engine Size
350
Nice rides!
Shows some real pride in ownership.
And valid warning.
It’s not just the Big box Parts stores either. Have had similar struggles with Napa as well.
If it’s a part for a newer vehicle or something I intend to last a long time, I generally make every attempt to buy OEM parts in recent years as the lack of headaches out weighs the additional parts cost. Most recent was 3 bad rebuilt alternators from Napa. 1 lasted a few months and actually died 200mi from home within a few miles of the original parking lot replacement. 2 more bad straight outta the box before I ever left the store.
I definitely like my chevys! Parts for a older trucks running a carb and no computer. It took me a long time to figure out what went wrong I just was doing preventative maintenance then it wouldn't even fire up. I have had good luck with precision from oriellys and lifetime warranty. I had one pulley get loose but no starting problems. Napa in my town rips people off and overcharging I caught them doing it once
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
15,573
Reaction score
23,962
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
Thanks man! I already been thinking about what all I want to do. There's a app I got you can lower ur trucks lol

You must be registered for see images attach
Zoom in... top of the rear wheel is a ghost!! Lol
 
Top