Fuel gauge stuck on full

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350
So I just fixed my fuel tank leak and replaced the filler hose. Just when I thought I fixed it and left to get gas, I noticed the gauge was stuck on full. No more leak, but now I can't tell how much gas I have. It had a half a tank before the gauge stopped working. I am not sure if this had something to do with me taking the hoses off, and starting the truck without them on, or if it is just a total coincidence and something electrical failed. How can I go about diagnosing this?

Sent from my SM-G950U using Tapatalk
 

73c20jim

Full Access Member
Joined
Jun 11, 2018
Posts
2,282
Reaction score
2,924
Location
Tombstone, AZ
First Name
Jim
Truck Year
1973, 1973
Truck Model
C20 2WD Custom Deluxe. C10 2WD Base Model
Engine Size
350 CID 195/260 HP Goodwrench crate, 400 CID 2bbl
Wow. Same exact post as mine posted a couple of days ago. Search is your friend.
 

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350
Wow. Same exact post as mine posted a couple of days ago. Search is your friend.
Well I'm on Tapatalk so that's prolly why I didn't see it, but we'll figure it out together! I'll go see if I can find your post.

Sent from my SM-G950U using Tapatalk
 

bedwards

Full Access Member
Joined
Nov 12, 2016
Posts
192
Reaction score
155
Location
Adger, Al.
First Name
Bryan
Truck Year
1985
Truck Model
c10 Silverado
Engine Size
305
A loose or disconnected wire or ground will cause a over full tank on the gauge.
 

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350
A loose or disconnected wire or ground will cause a over full tank on the gauge.
That could make sense because I bumped the tank a few times with the screwdriver when I was getting the hoses off. How can I find my ground wire though?

Sent from my SM-G950U using Tapatalk
 

73c20jim

Full Access Member
Joined
Jun 11, 2018
Posts
2,282
Reaction score
2,924
Location
Tombstone, AZ
First Name
Jim
Truck Year
1973, 1973
Truck Model
C20 2WD Custom Deluxe. C10 2WD Base Model
Engine Size
350 CID 195/260 HP Goodwrench crate, 400 CID 2bbl
I had a bad contact between the gauge and the panel. Now it shows empty all the time.

Having problems with other gauges also.

Quick fix. I gave up and bought an electronic panel and should arrive soon.

Have two sets of 1973 gauges and one set of 198? gauges I have no use for.
 

DirtyDYT

Full Access Member
Joined
Jul 17, 2018
Posts
158
Reaction score
84
Location
Ohio
First Name
Chris
Truck Year
‘79
Truck Model
C10
Engine Size
454
A loose or disconnected wire or ground will cause a over full tank on the gauge.

My K30’s gauge would only read correct with the send wire connected and the ground disconnected. If you connected the ground it showed over full until it dropped to about 3/4 by the time it was empty. This was true with the old original(?) tank and the new tank and sender. Maybe the senders had different ohm values over time?
 

thecantaloupeman

Full Access Member
Joined
May 14, 2019
Posts
447
Reaction score
144
Location
US
First Name
Dawson
Truck Year
1978
Truck Model
C20 Silverado Camper Special
Engine Size
350

Charlie

Mopar by Birth. Chevy by Choice.
Joined
Aug 2, 2017
Posts
1,837
Reaction score
909
Location
Euless, Texas
First Name
Don
Truck Year
1974
Truck Model
Cheyenne 10 LWB
Engine Size
350/TH350/AC/4 BBL Quadrajet
I read through your thread, but your problem must be different than mine. My gauge goes way past full. And it doesn't move when I start it. Even with the key off, the gauge is all the way past full. How do I check my ground wire? I know nothing about how it's layed out

Sent from my SM-G950U using Tapatalk

Mine was showing at 3'oclock position always. Replaced sending unit, fixed. There is a ground wire near tank mounted on the frame. If it worked before hose change, you mentioned you bumped it with screwdriver, then it may have knocked wire off of sending unit. Hard to tell if it did, but you can take a look to see. May be able to see between cab and bed but it is still hard to see.
 

bedwards

Full Access Member
Joined
Nov 12, 2016
Posts
192
Reaction score
155
Location
Adger, Al.
First Name
Bryan
Truck Year
1985
Truck Model
c10 Silverado
Engine Size
305
There is a ground that goes to the sending unit on each tank. Mine did the same thing, well past full, and I laid on my back and reached up on top of the tank and worked the connectors enough to get them where they made contact again. That's been a couple years ago and they have worked ever since. There are connectors as well in the valve if you have dual tanks. A lot of electrical gremlins in cars can be traced back to bad/corroded grounds.
 

FireAndDarts

Junior Member
Joined
Jul 16, 2019
Posts
2
Reaction score
1
Location
Colorado Springs
First Name
Blaise
Truck Year
1980
Truck Model
C10
Engine Size
5.7 VIN: L
Have you checked your fuses? I know it seems obvious, but didn't see that mentioned.

Someone, on another site suggests "A fuel gauge that looses battery voltage will stay in its last position it had with power until the problem is repaired."
So it may make sense that gauge is stuck in one particular position. (Check for unplugged wires!)

We just got a 1980 C10 and I've been going through assorted electrical issues - grab a copy of the wiring diagrams that match your truck from the reference sticky thread.

Then, you are tracing back from the gauge to whatever it connects to until you find the issue. Color-coded wires help :)
There are easy ways to test as you go - but having the right diagrams is very helpful.
 

Latest posts

Forum statistics

Threads
41,857
Posts
903,628
Members
33,370
Latest member
mitchell1128
Top