My78truck
'Ol Holly
- Joined
- Apr 7, 2019
- Posts
- 296
- Reaction score
- 226
- Location
- Virginia
- First Name
- Becky
- Truck Year
- 1978
- Truck Model
- C10 Silverado
- Engine Size
- 5.7L
How do I fix this? I applied three coats of clear coat last Thursday (May 20th) allowing it to dry between coats as per instructions on can. The temp was around 81 degrees with humidity at 75%. I have allowed it to cure for 5 days. I do not have the liberty of a climate controlled paint booth. It was not applied in direct sunlight and the truck is kept under a carport so always shaded. I live in Virginia and since applying the clear coat the temps went up to 90 degrees and humid. Currently the temp is 66 degrees and humidity at 79%. The high today is supposed to be 80 with 64% humidity.
So I would like to know what I need to do to correct this - heat, air flow (fan), leave it alone, strip it off and start all over (not what I really want to hear
). Also, should I be more concerned about heat or humidity when applying clear coat.
Thanks
So I would like to know what I need to do to correct this - heat, air flow (fan), leave it alone, strip it off and start all over (not what I really want to hear
Thanks
You must be registered for see images attach
Last edited: