binarywhisper
Junior Member
- Joined
- Aug 20, 2018
- Posts
- 2
- Reaction score
- 0
- Location
- Foxboro Ontario Canada
- First Name
- Steve
- Truck Year
- 1982
- Truck Model
- 1500
- Engine Size
- 350
It is a tilt column for an automatic and I am swapping it into my 82.
The rod that runs down the outside of the shaft to the white plastic switch is not connected inside of the column so I am taking it apart to reconnect it. I can't get the housing off.
Notice the key assembly does not use a screw to hold it in place but rather has a spring loaded tang. The shaft at the bottom is splined and has a single notch on one side.
With minor mods it will pop right in but I have to get it apart to reattach the rod first.
View media item 8198View media item 8197View media item 8196View media item 8195
The rod that runs down the outside of the shaft to the white plastic switch is not connected inside of the column so I am taking it apart to reconnect it. I can't get the housing off.
Notice the key assembly does not use a screw to hold it in place but rather has a spring loaded tang. The shaft at the bottom is splined and has a single notch on one side.
With minor mods it will pop right in but I have to get it apart to reattach the rod first.
View media item 8198View media item 8197View media item 8196View media item 8195